Angular Contact Ball B. FAG 7332 -B-MP-UA

The FAG 7332 -B-MP-UA angular contact ball bearing, with a 40-degree contact angle and a brass cage, is designed to accommodate combined loads with a 160 mm bore.

The single-row angular contact ball bearing 7332 -B-MP-UA is designed as an open rolling bearing for combined loads consisting of radial forces and single-sided axial forces. Thanks to its dimensions – a bore diameter of 160 mm, an outside diameter of 340 mm and a width of 68 mm – the component can withstand high forces. Manufactured from standard rolling-bearing steel 100Cr6 and fitted with a brass cage, this rolling bearing is designed for a temperature range of -20 to +200 degrees. The design complies with the standard tolerance class P0/PN or ABEC 1.

What loads can the 7332 -B-MP-UA angular contact ball bearing withstand?

This angular contact ball bearing is suitable for heavy-duty shaft mountings where axial forces must be absorbed in a defined direction. The contact angle of 40 degrees gives the bearing a high axial load-carrying capacity in one direction. It is used in bearing arrangements where axial forces are supported whilst simultaneously performing radial guidance functions. The cylindrical outer ring, without a groove or flange, fits into standard housing bores.

What does the universal design ‘UA’ mean in terms of pairing?

The design designation ‘UA’ indicates a universal bearing for installation in pairs. When users mount two bearings of this specification in an O or X arrangement on a shaft, a defined, small amount of axial clearance is achieved without the need for additional shims. This simplifies bearing selection and assembly. As this is an open design without an integrated seal, the lubrication supply and external sealing must be provided by the housing design.