Angular Contact Ball B. FAG 7319 -B-XL-TVP-UA

FAG 7319 -B-XL-TVP-UA angular contact ball bearing, dimensions 95x200x45 mm, for combined loads and smooth running.

The 7319 -B-XL-TVP-UA from FAG is a single-row roller bearing made from 100Cr6 bearing steel, with the main dimensions of 95 mm bore, 200 mm outer diameter and 45 mm width. Thanks to its design pressure angle of 40 degrees, this version can accommodate not only radial forces but also significant axial forces in one direction. The integrated polyamide cage ensures quiet running whilst maintaining a low weight. As an open bearing, the component can be flexibly integrated into existing lubrication systems using oil or grease.

In which load conditions is the 7319 -B-XL-TVP-UA angular contact ball bearing used?

The bearing is primarily used in designs where unidirectional axial forces occur alongside high radial loads. Thanks to its manufacture to tolerance class P0 or ABEC 1, the rolling bearing complies with standardised dimensional and running tolerances for standard assemblies. The suffix ‘UA’ indicates suitability for installation in pairs: when arranged in an X or O configuration, such a pair of bearings forms a ready-to-install unit capable of accommodating alternating axial loads.

What does the ‘UA’ universal design designation mean for this angular contact ball bearing?

The abbreviation UA indicates a universally adjustable bearing design. When two bearings are fitted in pairs, a small amount of axial clearance is established in an O or X arrangement without the need for additional adapter rings. When designing the system, take into account the permissible temperature range of -20 to +120 degrees Celsius, which is limited by the polyamide cage. As this is an unsealed bearing, the bearing housing requires external sealing against dirt and moisture.