Angular Contact Ball B. SKF 7218 BEP

The SKF 7218 BEP angular contact ball bearing, with dimensions of 90 × 160 × 30 mm and a 40-degree contact angle, offers a robust solution for combined radial and axial loads.

The SKF 7218 BEP angular contact ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6), with a bore diameter of 90 mm, an outer diameter of 160 mm and a width of 30 mm. Thanks to the specifically angled raceways with a contact angle of 40 degrees, the bearing accommodates radial loads as well as axial forces in one direction. The outer ring is cylindrical, without a flange or groove, which facilitates integration into standard housing bores.

What is the 7218 BEP angular contact ball bearing with a 40-degree contact angle suitable for?

This single-row bearing is specifically designed for applications where axial forces acting on one side are combined with radial loads on the shaft. Typical applications include rotating mechanical assemblies and supported shaft lines with directional power transmission. Thanks to the defined contact angle of 40 degrees, the design provides stable support for axial load components. If axial guidance is required in both directions, the bearing is combined with a mating bearing.

What are the key features of the polyamide cage and the open design?

This design features a lightweight polyamide cage and standard radial bearing clearance in tolerance class P0/PN (equivalent to ABEC 1). The polyamide cage guides the balls with low friction and is suitable for operating temperatures ranging from –20 to +120 degrees. As an open roller bearing without sealing washers, the design requires external sealing within the housing. This also allows for lubrication as required using suitable oil or grease.