FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 33,61 € | 638,56 € |
| 3 | 67,22 € | 604,95 € |
The FAG 7321-b-mp-ua angular contact ball bearing, with a brass cage and an outer diameter of 225 mm, provides a robust guide for combined radial and axial forces.
The FAG 7321-b-mp-ua angular contact ball bearing is a single-row rolling bearing designed for demanding industrial applications. Thanks to its internal geometry, this bearing accommodates both radial forces and axial forces in one direction. The open design without an integrated seal allows for direct lubrication via the housing system. With an outer diameter of 225 mm and a width of 49 mm, the bearing is suitable for stable shaft mountings in mechanical engineering.
This single-row angular contact ball bearing is primarily used where both radial and unilateral axial forces act on the shaft simultaneously. Such bearing arrangements are found in mechanical designs with defined guiding forces. As angular contact ball bearings can only accommodate axial forces in one direction, they are often fitted in pairs with a second bearing. The open design allows for flexible integration into oil- or grease-lubricated assemblies with external housing seals.
The integrated brass cage is characterised by high strength and precise guidance of the rolling elements. The material is suitable for applications involving thermal stresses or vibrations. The bearing covers a temperature range from –20 to +150 °C. The standard radial bearing clearance provides a balanced operating clearance for standard fits made from standard rolling-element bearing steel under normal operating conditions.
Single-row angular contact ball bearings accommodate radial forces and, at the same time, axial loads in one direction. Owing to the design-determined contact angle, the rolling elements transmit both force components jointly between the inner and outer rings. For alternating axial forces, users usually fit a second, counter-rotating support bearing.
This bearing has an outer diameter of 225 mm and a total width of 49 mm. These dimensions determine the installation space required in the bearing seat of the housing. To ensure a precise fit, designers and maintenance engineers should always take into account the surrounding connection geometry of the bearing location.
Brass cages offer high mechanical stability and guide the rolling elements along the raceways with minimal vibration. This solid material proves particularly effective at higher continuous operating temperatures and under vibration loads. The material retains its dimensional stability even under demanding conditions in continuous industrial use.
The bearing has a permissible operating temperature range of -20 to +150 °C. Manufactured from standard roller bearing steel, the bearing rings and balls retain their dimensional stability within this range. When designing the system, care must be taken to ensure that the selected external lubricant is also approved for the intended operating temperature.
Open roller bearings do not come with integrated seals or cover plates as standard. They therefore require a suitable external seal in the bearing housing to prevent lubricant loss and the ingress of dirt. At the same time, the open design allows for targeted initial lubrication as well as regular relubrication intervals during operation.
Standard radial bearing clearance refers to the standard clearance between the balls and raceways when the bearing is unmounted. This clearance compensates for the usual interference fit during press-fitting, as well as for the moderate thermal expansion of the rings during normal operation. No special clearances are required for this bearing clearance class.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/