Angular Contact Ball B. FAG 7315 -B-XL-TVP-UA

The FAG 7315 -B-XL-TVP-UA angular contact ball bearing (75x160x37 mm) can accommodate high radial loads as well as unilateral axial loads with minimal axial play in the bearing assembly.

The single-row angular contact ball bearing 7315 -B-XL-TVP-UA from FAG is designed for industrial applications involving combined loads. Thanks to its dimensions – a bore of 75 mm, an outside diameter of 160 mm and a width of 37 mm – this rolling bearing accommodates radial forces as well as unidirectional axial forces. The design, made from 100Cr6 rolling-element bearing steel, is characterised by dimensional stability and standardised tolerances in accordance with tolerance class P0 (ABEC 1), which facilitates installation in existing assemblies.

What is the 7315 -B-XL-TVP-UA angular contact ball bearing suitable for in operation?

This rolling bearing is typically used in bearing arrangements where defined guiding forces and high radial loads act simultaneously. Thanks to its nominal contact angle of 40 degrees, the design supports axial forces in one direction. As this is an open bearing without an integrated seal, it is suitable for systems supplied with lubricant in enclosed housings that protect against the ingress of dirt. The permissible temperature range is from –20 to +120 degrees Celsius.

What does the designation ‘UA’ mean for the paired bearing arrangement?

The suffix ‘UA’ denotes a universally adjustable single bearing for installation in pairs. When two bearings of this design are mounted in an O or X arrangement, a defined, small amount of axial clearance is established without the need for shims. The integrated TVP polyamide cage guides the rolling elements with low vibration and keeps the weight to a minimum. Lubrication is required for operation, as the bearing is of an open design.