Angular Contact Ball B. FAG 7206 -B-XL-TVP-UO

The FAG 7206 -B-XL-TVP-UO angular contact ball bearing, with a 30 mm bore and a 40-degree contact angle, accommodates combined radial and axial loads.

The single-row angular contact ball bearing 7206 -B-XL-TVP-UO from FAG Rolling Bearings combines a compact design with high load-carrying capacity for demanding bearing applications. Manufactured from standard rolling-bearing steel 100Cr6 and featuring an open design without a flange or groove on the outer ring, this rolling bearing is suitable for lubricated assemblies in mechanical engineering. The component has a bore of 30 mm, an outer diameter of 62 mm and a width of 16 mm with standard radial clearance.

What is the 7206 -B-XL-TVP-UO angular contact ball bearing suitable for?

In addition to radial forces, this angular contact ball bearing primarily accommodates unidirectional axial loads. The contact angle of 40 degrees facilitates the absorption of high axial forces during operation. Typical applications include bearing arrangements subject to single-sided axial forces and combined loads, where shafts must be guided with precision. As the bearing is of an open design, it can be connected directly to the structure’s on-site oil or grease lubrication system.

What distinguishes the UO design with a polyamide cage?

The UO design is a universal bearing which, when used in pairs in O and X arrangements, is pre-adjusted to be play-free. This simplifies the installation of paired bearing sets, as you do not need to manually adjust the axial play. The integrated polyamide cage (TVP) guides the balls with low friction and ensures quiet operation. The roller bearing operates within a temperature range of -20 to +120 degrees and complies with standard tolerance class P0 or ABEC 1.