Angular Contact Ball B. FAG 7206 -B-XL-TVP

The FAG 7206 -B-XL-TVP angular contact ball bearing, with dimensions of 30 × 62 × 16 mm and a contact angle of 40 degrees, can accommodate combined radial and single-direction axial loads.

The FAG 7206 -B-XL-TVP angular contact ball bearing is a single-row rolling bearing designed for demanding applications. Made from 100Cr6 steel, the rings and rolling elements are characterised by high dimensional stability. This open bearing has no integrated sealing washers, allowing lubricant to reach the raceways unimpeded. Manufactured to standard tolerance P0 or ABEC 1 and featuring standard radial clearance, this component can be integrated in a variety of ways into precision shaft mountings.

What is the 7206 -B-XL-TVP angular contact ball bearing suitable for?

This single-row bearing accommodates radial forces and axial forces in one direction. The raceways of the inner and outer rings are offset at an angle to one another, allowing forces to be transmitted at an angle to the radial plane. This rolling bearing is frequently used in pairs or as a paired arrangement when guide forces need to be supported in both directions. Typical applications include shaft mountings subject to axial thrust loads.

What is the function of the contact angle and the polyamide cage?

The contact angle of 40 degrees gives the bearing a high axial load capacity whilst maintaining a compact design. The suffix ‘TVP’ denotes a polyamide cage, which guides the rolling elements quietly and has a low mass. An operating temperature range of -20 to +120 degrees is permitted. As the bearing is of an open design, you can tailor the choice of lubricant and the environmental sealing directly to your design.