Angular Contact Ball B. FAG 7306 -B-XL-TVP-UA

The FAG 7306 -B-XL-TVP-UA angular contact ball bearing, with dimensions of 30x72x19 mm, offers high axial load-carrying capacity in one direction.

The single-row angular contact ball bearing 7306 -B-XL-TVP-UA from FAG is designed for combined loads with predominantly axial forces. The forces are transmitted obliquely to the radial plane via the 40-degree contact angle. Manufactured from 100Cr6 standard rolling bearing steel, this open rolling bearing is suitable for industrial applications where defined guiding forces in one direction need to be accommodated. The bearing is manufactured to standard tolerance P0 or ABEC 1 and has a standard radial clearance.

What is the 7306 -B-XL-TVP-UA angular contact ball bearing suitable for?

This angular contact ball bearing is suitable for shaft mountings that support high axial loads on one side in addition to radial forces. Thanks to the polyamide cage, the ball race runs quietly within a temperature range of –20 to +120 degrees Celsius. The cylindrical outer ring has no flange or groove, allowing the bearing to be fitted directly into smooth-bored housing bores. Operation requires an axial counter-support, as the bearing’s design means it can only accommodate axial forces in one direction.

What features does the UA universal design offer in bearing pairings?

The suffix ‘UA’ denotes a universal bearing for installation in pairs. When arranged in pairs in an O or X configuration, a small amount of axial clearance is automatically established without the need for shims. As this is an open bearing without sealing washers, installation requires external sealing as well as lubrication via the surrounding machine housing.