Withdrawal sleeves DIVERS AHX2317

The AHX2317 pull-off sleeve secures roller bearings with tapered bores onto 80 mm metric shafts, with dimensions of 80 x 95 x 74 mm, in mechanical engineering.

The AHX2317 pull-off sleeve serves as a fastening element for roller bearings with a tapered bore on cylindrical shafts. With a bore of 80 mm, an external diameter of 95 mm and a width of 74 mm, this component fits precisely into matched assemblies. The sleeve is press-fitted axially into the annular gap between the shaft and the inner ring of the bearing. This enables the sleeve to provide a force-fit connection that can be quickly released in the event of repairs.

For which rolling bearings is the AHX2317 withdrawal sleeve suitable?

Typical applications include bearing arrangements subject to regular maintenance cycles or inspections. The sleeve is suitable for self-aligning roller bearings or self-aligning ball bearings where the inner ring abuts against a fixed shaft shoulder. Pressing the sleeve into place reduces the bearing clearance in the rolling bearing by a defined amount, which contributes to smooth running of the shaft bearing. Compared with permanently pressed-in bearings, this design facilitates subsequent repair work on the shaft.

What is important when fitting with a 1:12 taper?

The outer surface has the standardised taper ratio of 1:12, matching the internal contour of common bearing series. When sliding the bearing onto the metric shaft, care must be taken to ensure that the bearing remains axially supported. For press-fitting and for subsequent removal, a suitable groove nut engages with the designated thread on the sleeve. As the product is supplied without a retaining plate or groove nut, designers and fitters must select these fasteners separately, tailored to the respective mounting dimensions.