| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 6,00 € | 113,90 € |
| 20 | 12,00 € | 107,90 € |
The SKF U410 steel washer, measuring 80 × 115 × 14 mm, provides a stable support for axial bearing arrangements.
The SKF U410 washer is a solid steel roller bearing washer for mechanical assemblies. With a bore of 80 mm, an outer diameter of 115 mm and a width of 14 mm, this component is used for axial support and positioning. In industrial assemblies, the washer acts as a defined contact surface between housing or shaft shoulders and adjacent rolling bearings when connecting components are not directly designed to act as a running surface.
The U410 shim is primarily used in general mechanical engineering, as well as in gearboxes and drives, as an axial shim or compensating washer. It absorbs axial forces and transfers them to the surrounding structure. Maintenance engineers specifically use this steel washer during overhauls to adjust axial play or compensate for dimensional tolerances in shafts and housings. The component also protects adjacent machine parts from direct running-in wear.
The key dimensions for a precise fit are an internal diameter of 80 mm, an external diameter of 115 mm and a component thickness of 14 mm. The steel material provides the necessary dimensional stability to withstand even high surface pressures during operation. During design and assembly, it is essential to ensure that the contact surfaces are flat and parallel, and free from burrs. A burr-free fit helps to prevent axial tilting and ensures uniform force transmission to the rolling bearing components.
The disc has an internal diameter of 80 mm, an external diameter of 115 mm and an axial width of 14 mm. These dimensions must be precisely matched to the mating dimensions of the shaft and the housing bore to ensure centred mounting in the bearing housing.
The washer is manufactured from solid steel. This material withstands mechanical compressive forces and counteracts deformation under axial loading. This makes the washer suitable for use as a pressure-resistant spacer in gearboxes and mechanical assemblies.
As an axial shim, its primary purpose is to compensate for installation tolerances, bridge shaft shoulders or provide a flat bearing surface for roller bearing rings. It protects adjacent components from wear and aids the precise adjustment of axial play in assemblies.
Replacement is recommended in the event of visible wear, scoring or plastic deformation on the mating surfaces. Uneven end faces can cause the adjacent bearing to become misaligned. Maintenance engineers should check the washer for cracks and dimensional accuracy during every major overhaul of the bearing housing.
Thanks to its substantial material thickness of 14 mm and its steel construction, the component can withstand high surface pressures. The washer transfers axial forces to the adjacent structure via its annular end face, thereby preventing localised stress peaks.
Before installation, all contact surfaces on the shaft and housing must be thoroughly cleaned and checked for burrs. The washer must be positioned flush against the designated shoulder. Ensure that it is correctly aligned and not skewed, so that the bearing rests evenly against it.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership