Tapered Roller Bearings FAG 33011

The FAG 33011 tapered roller bearing, measuring 55 × 90 × 27 mm, accommodates combined radial and axial loads.

The 33011 tapered roller bearing is a single-row roller bearing in a standard design that accommodates high radial forces as well as unidirectional axial forces. Thanks to the tapered geometry of the rollers and raceways, the rolling elements run precisely and with minimal slippage. This complete bearing is supplied ready for installation as an inner and outer ring. Industrial users and workshops rely on this branded bearing from FAG when rigid shaft guidance is required under combined loads.

What is the 33011 tapered roller bearing suitable for?

Typical applications include mechanical engineering, industrial gearboxes and wheel and axle bearings subject to high impact and continuous loads. As single-row tapered roller bearings can only accommodate axial forces in one direction, they are usually fitted in pairs, facing each other. The 33011 tapered roller bearing is designed for a temperature range of -30 to +120 degrees. It offers high rigidity wherever guidance and load-carrying capacity are required in continuous operation.

What is important to consider regarding installation and the tolerance class?

Manufacture to tolerance class P0/PN or ABEC 1 meets the standard industrial requirement for general precision in mechanical engineering. The component is not self-retaining: you can fit the outer ring separately from the inner ring with the roller set, which facilitates housing fit. A sturdy sheet steel cage guides the tapered rolling elements evenly. When installing, adjust the required bearing clearance or preload directly opposite the second bearing in the arrangement.