Tapered Roller Bearings FAG 32215

The FAG 32215 tapered roller bearing (75 x 130 x 33.25 mm) can accommodate high radial and axial loads simultaneously and is suitable for demanding industrial applications.

The 32215 tapered roller bearing is a single-row roller bearing to standard tolerance P0/PN (ABEC 1), designed for combined loads. Its dimensions are 75 mm bore diameter, 130 mm outside diameter and 33.25 mm overall width. As an open, complete bearing from FAG Rolling Bearings, it features a sheet steel cage that guides the tapered rollers. This tapered roller bearing is typically used in shaft mountings and gearbox stages in general mechanical engineering applications where defined guiding forces are required.

What is the 32215 tapered roller bearing suitable for in mechanical engineering?

This roller bearing accommodates high radial forces as well as axial forces from one direction. As the extended lines of action of the tapered rollers converge on the bearing axis, the rolling elements roll without slippage. Design engineers prefer to use the 32215 design in bearing arrangements subject to combined loads. To accommodate alternating or bidirectional axial forces, the bearing is usually mounted in pairs in a counter-rotating arrangement with a second tapered roller bearing, with the bearings aligned against each other.

What is important when installing the 32215 tapered roller bearing?

Tapered roller bearings are not self-retaining. The inner ring with roller set and the outer ring can be fitted separately, which facilitates installation in housings and on shafts. The operating clearance is only created by the deliberate alignment of the bearing rings during assembly. The integrated sheet steel cage is designed for a temperature range of -30 to +120 degrees. External housing seals and lubricants should be selected to suit the ambient conditions.