Tapered Roller Bearings FAG 32019 -X

The FAG 32019-X tapered roller bearing, with dimensions of 95 × 145 × 32 mm, can accommodate high radial loads as well as axial loads on one side.

The 32019 -X tapered roller bearing is a single-row radial roller bearing in standard design. Owing to the tapered arrangement of the rolling elements, this design is particularly suitable for shaft mountings where radial and axial forces occur simultaneously. The complete FAG bearing comprises an inner ring with a set of rollers and the corresponding outer ring. With a bore of 95 mm, an outer diameter of 145 mm and a width of 32 mm, the unit meets demanding industrial requirements.

What forces and loads does the 32019-X tapered roller bearing accommodate?

Tapered roller bearings of this design are primarily used for combined loads on rotating shafts. As single-row tapered roller bearings, by their design, can only accommodate axial forces in one direction, they are usually installed in pairs, facing each other, in practice. Typical applications include gearbox construction and conventional industrial drives. The geometry of the raceways dissipates the forces and promotes smooth rolling during rolling contact.

What role do the sheet steel cage and tolerance class P0 play?

This bearing features a sheet steel cage that guides the tapered rollers and keeps them spaced apart. The permissible temperature range extends from –30 to +120 degrees and covers standard operating conditions in everyday industrial use. Manufactured to tolerance class P0/PN or ABEC 1, the component complies with the standardised normal tolerance. As the inner and outer rings are separable, you can mount the components separately onto the shaft and housing as required.