Tapered Roller Bearings SKF 32007 X

The single-row SKF tapered roller bearing 32007 X (35x62x18 mm) is suitable for combined loads at operating temperatures ranging from -30 to +120 degrees.

The 32007 X tapered roller bearing is an open, single-row roller bearing from SKF in the Explorer series. Its main dimensions are a bore diameter of 35 mm, an outer diameter of 62 mm and a total width of 18 mm. As a complete tapered roller bearing, the unit consists of the inner ring with a roller cage and the separate outer ring. Thanks to the line contact of the tapered rolling elements, the component simultaneously transmits high radial forces and single-sided axial forces in gearboxes and shaft bearings.

In which industrial applications is the 32007 X tapered roller bearing used?

This single-row bearing is primarily installed where shafts are subjected to heavy radial loads and axial thrust forces from a single direction. Typical applications can be found in general mechanical engineering as well as in gearbox stages for shaft bearings. As tapered roller bearings, by design, can only accommodate axial forces in one direction, designers usually fit a second bearing in a mirror-image configuration opposite the first. The version with a sheet steel cage is suitable for both stationary drives and mobile machinery.

What is important to bear in mind when installing the 32007 X tapered roller bearing with a sheet steel cage?

As the bearing is designed to be disassembled, the inner and outer rings can be fitted separately onto the shaft and housing. This simplifies handling during maintenance and mass production. The axial clearance is adjusted only during installation via the mating bearing. The operating temperature range is from -30 to +120 degrees. Manufactured to tolerance class P0/PN or ABEC 1, the component meets the standard requirements for dimensional and concentricity accuracy for industrial use.