Tapered Roller Bearings FAG 32314

The FAG 32314 tapered roller bearing, measuring 70 × 150 × 54 mm, is designed to withstand high radial and axial loads in mechanical engineering applications.

The single-row tapered roller bearing 32314 is designed as a separable rolling bearing for demanding applications. Thanks to the tapered raceways and rollers, the design simultaneously transmits high radial forces as well as axial forces from a single direction. This complete bearing from FAG comprises the inner ring with a set of rollers and the corresponding outer ring. With a bore of 70 mm and an outer diameter of 150 mm, the component is suitable for typical shaft diameters in gearbox and plant engineering.

In which applications is the 32314 tapered roller bearing used?

This bearing is used where combined loads occur and precise shaft guidance is required. Typical applications include gearboxes, axle bearings and drive shafts. As a single-row bearing can only accommodate axial forces from one side, users usually fit a second tapered roller bearing in a mirror-image configuration to provide counter-guidance. The separate design of the inner ring and outer ring simplifies step-by-step installation into the housing and onto the bearing seat.

What are the characteristics of the sheet steel cage and standard tolerance?

The integrated sheet steel cage guides the rolling elements and withstands mechanical stresses during everyday operation. The bearing is designed for operating temperatures ranging from –30 to +120 degrees. Manufactured to tolerance class P0 or PN (comparable to ABEC 1), the standard precision meets the common fit requirements in general mechanical engineering. During assembly, care must be taken to ensure the correct adjustment of the bearing clearance or preload relative to the mating bearing.