Spherical Roller Bearings SKF 22328 CCK/C3W33

The SKF 22328 CCK/C3W33 self-aligning roller bearing offers high load-carrying capacity with dimensions of 140x300x102 mm, a tapered bore and increased C3 clearance for demanding industrial applications.

The SKF 22328 CCK/C3W33 self-aligning roller bearing can handle heavy radial loads as well as axial forces in both directions. Thanks to the spherical outer ring raceway, this open roller bearing automatically compensates for misalignment or shaft deflection. Manufactured from standard 100Cr6 rolling-bearing steel with a robust sheet steel cage, this design covers a wide temperature range from -30 to +200 degrees. Design engineers and maintenance personnel value this design when high loads and misalignments need to be safely accommodated during operation.

Under what loads does the 22328 CCK/C3W33 self-aligning roller bearing prove its worth?

This self-aligning roller bearing primarily accommodates heavy radial loads as well as combined axial loads caused by shaft deflection. As the inner ring and roller set can move at an angle relative to the outer ring, this design helps to prevent excessive edge stresses in the event of misalignment. The integrated lubrication groove, together with the lubrication holes in the outer ring, facilitates targeted relubrication during operation and reliably supports scheduled maintenance cycles.

What are the advantages of a tapered bore and C3 clearance?

The designation CCK refers to a tapered bore with a taper ratio of 1:12. This design facilitates mounting on tapered shaft seats or using mounting and withdrawal sleeves. The slightly increased radial bearing clearance (C3) provides the necessary compensation, as the radial bearing clearance is reduced by the press-fit of the inner ring and thermal expansion may occur during operation. In addition, the increased running accuracy to tolerance class P5 ensures low-vibration, smooth running of the unit.