DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 20 | 0,44 € | 8,70 € |
| 50 | 0,90 € | 8,24 € |
| 100 | 1,36 € | 7,78 € |
The H304 clamping sleeve is used to secure roller bearings with a tapered bore onto metric shafts with a diameter of 17 mm and a width of 28 mm.
The H304 clamping sleeve allows you to flexibly mount bearings with tapered bores onto smooth or stepped shafts without the need for additional stop shoulders. When tightened, the slotted fastening element engages positively between the shaft seat and the inner ring. This standard version is designed for metric shafts and achieves the required interference fit through controlled axial displacement. Maintenance engineers and designers use this component to reduce assembly times and adjust bearing seats to a precise fit.
The clamping sleeve is primarily used in conjunction with self-aligning ball bearings or self-aligning roller bearings with a tapered bore. It is suitable for designs where bearing positions on solid shafts need to be freely positioned. As no shoulders are required on the shaft, the shaft cross-section remains undiminished. The component also facilitates the replacement of bearing units during maintenance and repair work.
The outer taper with a ratio of 1:12 corresponds to the standard design for roller bearings with a tapered internal bore. When the bearing is slid onto the shaft, its radial clearance is reduced evenly, allowing for controlled adjustment of the operating clearance. The supplied groove nut enables the inner ring to be pressed on in a controlled manner. Once tightened, the associated retaining plate engages with a tab into a groove in the nut and serves to prevent accidental loosening during operation.
The sleeve has a 17 mm bore for mounting on the shaft. The maximum external diameter at the collar is 32 mm, with a total width of 28 mm. These dimensions determine the appropriate shaft diameter and the required installation space.
The product comprises the slotted sleeve body, together with a matching groove nut and the appropriate retaining plate. You therefore receive the complete assembly for mechanically securing the bearing to the shaft.
The shell surface has a taper of 1:12. This means that the diameter varies by 1 mm over an axial length of 12 mm. This ratio is designed to fit roller bearings with a tapered inner bore.
This version is suitable for cylindrical, metric shafts with a nominal diameter of 17 mm. The shaft requires neither shoulders nor threads, as the clamping is achieved purely by friction through the wedging action of the inner ring.
The retaining plate is positioned between the inner bearing ring and the groove nut. After tightening the nut, bend one of the outer tabs of the plate into a recess on the circumference of the nut. This ensures that the connection is protected against rotation by a positive fit.
Sliding the bearing axially onto the tapered surface causes the inner ring to expand. This specifically reduces the original bearing clearance inside the rolling bearing, allowing you to adjust the interference fit and set the desired operating clearance.