H2314 Adapter Sleeves by DIVERS
H2314 Adapter Sleeves by DIVERS

DIVERS

Adapter Sleeves DIVERS H2314

Technical data
 
Inner diameter
60 mm
Outer diameter
92 mm
Width
68 mm
Scope of delivery
With locking washer and groove nut
Design
Standard version
Cone
01:12
Shaft type
For metric shafts
Weight
0,897 kg
Scale quantity Your discount Unit price
25 1,43 € 27,15 €
35 2,86 € 25,72 €
28,58 €
inkl. MwSt, zzgl. Versandkosten

7 ready to ship

Adapter Sleeves DIVERS H2314
In Stock

Adapter Sleeves DIVERS H2314

The H2314 clamping sleeve secures roller bearings with a tapered bore onto cylindrical 60 mm shafts and has an outside diameter of 92 mm and a width of 68 mm.

The H2314 clamping sleeve allows roller bearings with a tapered inner diameter to be secured by friction on cylindrical shafts without a shaft shoulder. This mounting method facilitates axial positioning in machines and drives. The sleeve has a 60 mm bore and is designed for roller bearings with a taper ratio of 1:12. The standard version is supplied with the sleeve, a matching groove nut and a retaining plate.

For which bearings is the H2314 clamping sleeve suitable?

The H2314 clamping sleeve is used to secure self-aligning ball bearings and self-aligning roller bearings with tapered bores onto smooth or stepped shafts. It enables rolling bearings to be mounted at any position on metric shafts with a diameter of 60 mm. This design is suitable for applications where axial guidance and a uniform interference fit on the shaft are required without the need for pre-machined shaft shoulders.

What role do the groove nut and locking plate play during assembly?

The grooved nut, included in the scope of delivery, drives the bearing in a controlled manner onto the tapered outer surface of the sleeve as it is tightened. As the bearing is pushed onto the shaft, the inner ring expands, allowing the bearing clearance to be adjusted. Once tightened, the locking plate engages with a groove in the nut. This design is intended to prevent the connection from coming loose of its own accord during operation and to help secure the nut in a positive fit.

What are the dimensions of the H2314 clamping sleeve?

The sleeve has an internal bore of 60 mm for compatible metric shafts. The external diameter is 92 mm and the overall width is 68 mm. The outer surface has a taper ratio of 1:12.

What is included in the scope of delivery for the H2314 clamping sleeve?

The scope of supply includes the clamping sleeve together with the matching groove nut and a retaining plate. This combination is used for the radial clamping and axial fixing of suitable roller bearings on metric shafts.

For which roller bearings is this clamping sleeve suitable?

The sleeve is designed for bearings with a tapered bore with a taper ratio of 1:12. These include, for example, self-aligning roller bearings and self-aligning ball bearings, whose type designation usually includes a ‘K’ at the end to indicate the tapered design.

What effect does a cone ratio of 1:12 have?

The ratio of 1:12 describes the taper of the outer diameter along the length of the sleeve. When the bearing is fitted using a groove nut, the radial bearing clearance is reduced, resulting in a tight press fit between the shaft, the sleeve and the inner ring.

How does the enclosed retaining plate secure the joint?

Once the groove nut has been tightened, an outer tab on the locking plate engages with a groove in the nut. At the same time, an inner tab fits into the slot in the sleeve, thereby securing the nut against rotation by means of a positive fit.


, ,
,
10001390
Product added to compare.
Product added to wishlist

Reset Password

New Account Register