DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 1,33 € | 25,25 € |
| 25 | 2,65 € | 23,93 € |
| 50 | 3,99 € | 22,59 € |
The H214 clamping sleeve is designed to securely mount roller bearings with a tapered bore on metric 60 mm shafts with an external diameter of 92 mm and a width of 41 mm.
The H214 clamping sleeve secures rolling bearings with a tapered inner ring onto cylindrical, smooth or stepped shafts. As a functional machine component, this clamping sleeve provides a positive-fit connection by sliding the bearing axially onto the sleeve. Typical applications include bearing arrangements in which self-aligning roller bearings or self-aligning ball bearings are fitted. The metric version is designed for shafts with a diameter of 60 mm and facilitates both assembly and disassembly in industrial settings.
The H214 clamping sleeve is used to mount rotating components on solid or stepped shafts. The fastening element is primarily used with bearings featuring a tapered bore, for example with self-aligning roller bearings in housing units. The required operating clearance of the bearing assembly can be adjusted by axial displacement along the sleeve. The design does not require any additional shaft shoulders for axial securing.
In addition to the slotted sleeve, the scope of supply includes a matching slotted nut and a retaining plate. When tightened, the slotted nut presses the inner ring of the bearing against the tapered surface at a ratio of 1:12. The retaining plate engages positively in a groove in the nut, securing it against accidental loosening during operation. Clean mating surfaces and uniform tightening during assembly help to prevent stress concentrations.
The clamping sleeve has a bore of 60 mm, an external diameter of 92 mm at the slotted nut and a total width of 41 mm. These dimensions correspond to the standard design for cylindrical shafts with a nominal diameter of 60 mm.
The taper ratio of 1:12 describes the pitch of the outer surface of the sleeve. Over an axial length of 12 mm, the diameter tapers or increases by exactly 1 mm. This dimension is designed to fit roller bearings with tapered bores in accordance with standard specifications.
This version is designed for metric shafts with a nominal diameter of 60 mm. It can be positioned freely on both smooth and stepped cylindrical shafts without the need for additional stops. Tightening the nut secures the sleeve to the shaft by friction.
The H214 clamping sleeve comprises not only the slotted sleeve body but also a matching grooved nut and an associated retaining plate. This combination forms a ready-to-install unit. The retaining plate engages with the recesses in the nut and secures the connection against vibrations during operation.
The bearing with a tapered bore is slid axially onto the tapered outer surface of the sleeve. Tightening the slotted nut causes the slotted sleeve body to constrict and press against the shaft. At the same time, the inner ring of the bearing expands slightly, which reduces the radial bearing clearance in a controlled manner.
The sleeve is predominantly combined with self-aligning roller bearings and self-aligning ball bearings, which have a tapered bore. These bearing designs allow for the compensation of shaft deflection and misalignment. When used in conjunction with housing assemblies, the sleeve allows the bearing to be mounted at various positions on the shaft.