DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 20 | 0,61 € | 11,50 € |
| 50 | 1,21 € | 10,90 € |
| 100 | 1,82 € | 10,29 € |
The H206 clamping sleeve secures roller bearings with a tapered bore onto metric 25 mm shafts, and includes a matching groove nut and retaining plate.
The H206 clamping sleeve allows you to mount bearings with a tapered bore onto cylindrical shaft sections. The fastening element has a bore of 25 mm, an outer diameter of 45 mm and a width of 27 mm. Thanks to its slotted design, the component can be flexibly positioned on smooth or stepped shafts. The clamping sleeve is supplied as a ready-to-install unit together with the corresponding slotted nut and the matching retaining plate.
This standard version is primarily designed to securely fasten self-aligning ball bearings or self-aligning roller bearings with a tapered inner seat onto metric shafts via a positive fit. As no additional shaft shoulders or steps are strictly necessary, the bearing assembly can be flexibly positioned at the desired point on the shaft. Typical applications are found in general mechanical engineering, in the design and maintenance of rotating shafts. The slotted component compensates for minor dimensional deviations in the shaft and ensures precise axial alignment of the mounted components.
The outer taper with a 1:12 ratio is designed to fit rolling bearings with a matching tapered inner bore. When the slotted nut is tightened, the inner ring of the bearing slides axially onto the sleeve, thereby reducing the sleeve’s diameter and creating a firm frictional fit. This axial movement simultaneously sets the required operating clearance for the rolling elements. The enclosed retaining plate engages positively with its tabs and is designed to prevent the nut from coming loose unintentionally during operation.
The H206 clamping sleeve has an internal diameter of 25 mm for mounting metric shafts. The outer diameter is 45 mm across the threaded section or groove nut, whilst the component has a total width of 27 mm. The outer surface has a pitch ratio of 1:12 to accommodate tapered bore bearings.
In addition to the slotted sleeve body, the scope of delivery includes the matching grooved nut and the corresponding retaining plate. This provides you with a complete fixing kit that enables the bearing to be secured to the shaft by both a force fit and a form fit, without the need for additional turned parts.
This sleeve is suitable for roller bearings with a taper ratio of 1:12 in the bore. These include self-aligning ball bearings and self-aligning roller bearings with a correspondingly tapered inner ring. The shaft diameter at the mounting point must be 25 mm.
The sleeve is slid onto the shaft and the bearing is placed on the taper. Tightening the groove nut causes the bearing to slide axially onto the sleeve. The sleeve compresses elastically and clamps firmly onto the shaft, whilst at the same time reducing the radial bearing clearance.
The retaining plate is designed to prevent the groove nut from coming loose accidentally during operation. After tightening the nut, fitters bend one of the outer metal tabs into a recess on the outer diameter of the nut. An inner tab thereby engages positively with the longitudinal slot in the sleeve.
No, one advantage of the clamping sleeve is that it can be fitted onto smooth cylindrical shafts without any fixed shoulders or recesses. The clamping force is generated solely by sliding the bearing onto the tapered outer surface, which simplifies shaft manufacture.