Self-Aligning Ball B. FAG 2307 -TVH-C3

The FAG 2307 -TVH-C3 self-aligning ball bearing, with dimensions of 35x80x31 mm, a polyamide cage and C3 clearance, provides reliable compensation for shaft deflection.

The double-row 2307 -TVH-C3 self-aligning ball bearing from FAG Rolling Bearings is designed to accommodate radial forces whilst simultaneously compensating for misalignment. Manufactured from standard rolling-bearing steel 100Cr6, this rolling bearing has a bore of 35 mm, an outer diameter of 80 mm and a width of 31 mm. Designed as an open bearing, it can be integrated directly into existing lubrication circuits. It is manufactured to standard tolerance P0/PN or ABEC 1 with a cylindrical inner ring.

What is the 2307 -TVH-C3 self-aligning ball bearing suitable for?

The bearing is primarily used in applications where elastic shafts or housing deflection occur. Thanks to the shared hollow-spherical raceway in the outer ring, the two rows of balls adjust their angular position automatically during operation. The bearing automatically compensates for misalignment between the inner and outer rings without generating excessive edge stresses. Typical applications include shaft mountings where static or dynamic misalignment between the bearing positions needs to be compensated for.

What are the advantages of the polyamide cage and the C3 clearance?

The suffix TVH denotes a polyamide cage, which ensures quiet running and low friction. This cage type covers an operating temperature range from –30 to +120 degrees Celsius. The designation C3 indicates a slightly increased radial clearance compared with the standard CN version. This increased clearance helps to prevent the bearing from becoming stressed should temperature differences arise between the inner and outer rings, or where tight fits are mounted on the 35 mm shaft.