SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 1,65 € | 31,50 € |
| 35 | 3,32 € | 29,83 € |
The 2206 E-2RS1TN9 self-aligning ball bearing (30x62x20 mm) compensates for misalignment and, thanks to its double-sided lip seals, protects against the ingress of dirt.
The SKF 2206 E-2RS1TN9 double-row self-aligning ball bearing is designed for applications where shaft deflection or misalignment may occur. Thanks to the shared hollow-spherical raceway in the outer ring, the two rows of balls adjust flexibly in the event of misalignment. The rolling bearing has a cylindrical bore of 30 mm, an outer diameter of 62 mm and a width of 20 mm. It is made from standard roller bearing steel (100Cr6) in tolerance class P0/PN or ABEC 1.
This double-row bearing reliably compensates for shaft deflection or static misalignment between the inner and outer rings during operation. Typical applications include designs with long shafts or assembly inaccuracies caused by misalignment. The bearing primarily absorbs radial forces, whilst the seals on both sides protect the interior from particles. Thanks to its permissible operating range of –30 to +100 degrees, the component operates stably even under fluctuating ambient temperatures.
The seals on both sides (2RS1) keep contaminants and moisture out of the bearing interior and minimise lubricant loss. A polyamide cage (TN9) ensures the balls are guided correctly, keeping friction low and promoting quiet operation. This version has a standard radial bearing clearance and is suitable for standard installation conditions. During assembly, care must be taken to ensure that the mating surfaces on the shaft and housing are clean, so that the seal lips remain undamaged and the ability to swivel is maintained.
With an internal diameter of 30 mm, an external diameter of 62 mm and a width of 20 mm, this design complies with standardised dimensions. The inner ring has a standard cylindrical shape. These key dimensions enable the double-row bearing to be fitted precisely into housing bores and onto suitable shaft seats.
The designation indicates specific design features: the letter E refers to the optimised internal design. The suffix 2RS1 denotes abiding seals fitted on both sides to protect against dust and moisture. The abbreviation TN9 denotes the polyamide cage, which guides the rolling elements with low friction and promotes quiet operation.
The outer ring of the bearing has a continuous hollow spherical raceway for both rows of balls. In the event of shaft deflection or angular misalignment between the inner and outer rings, the balls, together with the inner ring, pivot within this hollow sphere. This distributes the load without causing localised edge stresses, thereby reducing wear caused by shaft misalignment.
The permissible operating range is from -30 to +100 degrees Celsius. This limit is determined by the materials used for the sealing discs that come into contact with each other and the polyamide cage. Within this temperature range, the components retain their mechanical strength and the sealing performance remains reliable.
This model is designed with standard radial bearing clearance. This design is suited to standard mounting fits and moderate operating temperatures. Under average thermal conditions, the standard bearing clearance provides sufficient play to prevent the rolling elements from becoming jammed after the bearing has been pressed onto the shaft.
The inner and outer rings, as well as the balls, are made of standard rolling-bearing steel (100Cr6). This material is characterised by high hardness and wear resistance under cyclic loading. The retainer is made of lightweight polyamide, whilst the integrated scraper seals ward off mechanical contaminants and dirt particles.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership