Radial Insert Ball B. SKF YET205

The SKF yet205 thrust bearing, with an outer diameter of 52 mm and a seal that seals on both sides, provides protected support for rotating shafts.

The yet205 clamping bearing is a ready-to-install unit made from standard rolling-bearing steel for industrial applications. With a cylindrical bore, an outer diameter of 52 mm and a width of 31 mm, this roller bearing can be fitted directly onto suitable shaft seats. The component is manufactured by SKF and primarily withstands radial loads. Its standardised design facilitates repairs and provides a functional component for standardised assemblies.

In which applications is the yet205 thrust bearing used?

This rolling bearing is used on rotating shafts in housing assemblies that must operate within a defined temperature range. The yet205 clamping bearing is specified for operating temperatures from -20 to +120 °C. Typical applications are found in general mechanical engineering, where loads are predominantly radial. Thanks to its sealed design, the unit is suitable for locations where dirt particles or splashing water may affect the bearing position.

What are the advantages of the double-sided sliding seal?

The double-sided sliding seal contacts the inner ring with its sealing lips. This continuous contact forms a mechanical barrier against dust, moisture and solid foreign particles. At the same time, the lubricant remains inside the bearing. When installing the yet205 tension bearing, there is therefore no need to fit external sealing elements. During assembly, ensure that the shaft seat is clean so that the sealing lips remain undamaged when the bearing is slid onto the shaft.