DIVERS
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 50 | 0,04 € | 0,65 € |
| 100 | 0,06 € | 0,63 € |
| 250 | 0,11 € | 0,58 € |
| 500 | 0,14 € | 0,55 € |
The MB3 steel retaining plate is designed to provide a positive-lock axial retention of slotted nuts on shafts with a 17 mm bore and an external diameter of 32 mm.
The MB3 retaining plate prevents slotted nuts from coming loose unintentionally during operation. Designed as a form-fit connecting element, the component engages with the longitudinal slot in the shaft or clamping sleeve via an internal tab. At the same time, one of the outer tabs is bent into a groove in the nut. This principle prevents mechanical connections from rotating of their own accord in the event of vibrations or fluctuating torques in roller bearing assemblies.
The component is primarily used in rolling bearing assemblies where bearings are mounted on a tapered shaft seat or by means of a locking sleeve. The MB3 retaining plate locks the corresponding groove nut in its defined preload position. Rotating shafts are subjected to constant vibrations during industrial operation, which can cause unsecured connections to come loose. The retaining plate helps to prevent the assembly from loosening and to maintain the set bearing clearance.
The precise interaction between the shaft, the grooved nut and the retaining plate is crucial to its function. With a bore of 17 mm and an outer diameter of 32 mm, the component fits onto corresponding shaft shoulders. The steel material provides the necessary ductility: the outer tabs can be bent without cracking, yet still withstand the tangential forces that occur. A new plate should always be used for each new installation to prevent material fatigue at the bent sections.
A mechanical retaining element made of steel, designed to prevent nut rotation on shafts or clamping sleeves by means of a positive fit. It features an inner tab for the shaft groove and several outer tabs, one of which is bent into the nut after tightening.
The component has an internal diameter, or bore, of 17 mm and an external diameter of 32 mm. These dimensions are designed to fit the corresponding metric shaft diameters and associated slotted nuts.
The retaining element is made of tough steel. This material allows the retaining tabs to be bent precisely using standard assembly tools, without the metal breaking or losing its holding force.
For safety reasons, it is advisable to replace the part with a new one whenever it is removed. Repeatedly bending the retaining tabs back and re-angling them causes work hardening and micro-cracks in the steel, which reduces the holding force.
The internal tab engages with the groove in the shaft and locks the sheet metal in place to prevent rotation. Once the groove nut has been tightened axially, a suitable external tab is bent into a groove around the circumference of the nut, thereby creating a positive-lock connection between the nut and the shaft.