Deep Groove Ball Bearings SKF 6022 -2Z

The SKF 6022 -2Z deep groove ball bearing, with a 110 mm bore, 170 mm outer diameter and cover plates on both sides, offers reliable protection against dirt particles.

The 6022-2Z deep groove ball bearing is a single-row radial ball bearing made from standard 100Cr6 rolling bearing steel in the SKF Explorer design. The component primarily accommodates radial forces as well as axial loads in both directions. The bearing has main dimensions of 110 × 170 × 28 mm. Manufactured to a high dimensional accuracy in tolerance class P6 and with standard running accuracy PN, this rolling bearing is suitable for demanding industrial applications with a cylindrical shaft fit.

In which installation situations does the 6022-2Z deep groove ball bearing prove its worth?

The bearing is designed for rotating shafts where radial loads predominate and, at the same time, axial loads in both directions must be supported. Thanks to its robust sheet steel cage, the bearing guides the rolling elements precisely at medium to high speeds. The permissible temperature range is from –20 to +120 degrees Celsius. As the outer ring has no flange or groove, the roller bearing can be fitted directly into cylindrical housing bores.

What features do the 2Z end plates and standard radial bearing seals offer?

The sheet metal end plates on both sides, designated 2Z, form non-contact gap seals on the outer ring. They keep out coarse dirt and foreign particles without generating additional operating heat or rotational resistance through friction. The bearing has standard radial clearance for normal installation conditions. As the bearing does not have integrated electrical insulation, electrical leakage currents via the housing or the shaft should be avoided by design.