SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 0,98 € | 18,50 € |
| 25 | 1,94 € | 17,54 € |
| 50 | 2,92 € | 16,56 € |
The SKF 6307 -2Z/C3 deep-groove ball bearing, measuring 35x80x21 mm, with cover plates on both sides and a C3 clearance, offers reliable operation at higher operating temperatures.
This single-row deep-groove ball bearing 6307 -2Z/C3 is designed primarily to accommodate radial loads as well as moderate axial loads in both directions. Manufactured from standard rolling-element bearing steel 100Cr6 and fitted with a sheet steel cage, this design covers a temperature range from –20 to +120 degrees. It is manufactured to tolerance class P0/PN (ABEC 1). A cylindrical outer ring without a groove or flange allows for installation in standardised housing bores.
This rolling bearing is primarily used in applications where low friction, high speeds and moderate axial loads are combined. Thanks to the combination of non-contacting cover plates and increased internal clearance, this design is particularly suitable for applications involving operational heating. The cover plates keep out coarse dirt particles, whilst the lubricant remains inside the bearing.
The suffixes provide crucial information for the design of your bearing arrangement. The designation -2Z stands for gap seals on both sides made of profiled sheet steel, which operate without sliding contact and therefore generate hardly any additional frictional heat. The additional designation C3 indicates a slightly increased radial bearing clearance. This increased clearance between the balls and raceways compensates for thermal expansion caused by heat build-up during operation and prevents internal stresses resulting from tight fits on the shaft or housing.
This radial ball bearing has a bore of 35 mm, an outer diameter of 80 mm and a width of 21 mm. The outer ring is cylindrical in design and has no groove or flange, meaning the component can be fitted into standardised housing seats.
The designation -2Z indicates cover plates made of sheet steel fitted on both sides. These gap seals protect the interior of the bearing from the ingress of solid contaminants and prevent the escape of grease. As the cover plates do not come into contact with the inner ring, no frictional resistance is generated, which enables high rotational speeds.
The C3 rating indicates a slightly increased radial bearing clearance compared with the standard clearance. This increased clearance between the rolling elements and raceways prevents the bearing from seizing up should the inner and outer rings expand to different degrees due to tight fits or temperature differences caused by operation.
The bearing is designed for an operating temperature range of -20 to +120 degrees. The design, which comprises 100Cr6 rolling-element bearing steel combined with a sheet steel cage, is optimised to withstand the thermal stresses encountered within this range.
In this single-row ball bearing, a sheet steel cage guides the rolling elements. This type of cage is characterised by its low weight, compact design and resistance to lubricants and typical operating temperatures in mechanical engineering.
The component complies with standard tolerance class P0 (also known as standard tolerance PN), which corresponds to ABEC 1. This precision class meets the requirements of most industrial applications in terms of concentricity, dimensional tolerances and axial run-out on the shaft and housing.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership