Deep Groove Ball Bearings SKF 6232 M/C3

The SKF 6232 M/C3 deep groove ball bearing, with dimensions of 160 × 290 × 48 mm, can withstand high radial loads and, thanks to its C3 rating, offers greater clearance when the bearing heats up.

The 6232 M/C3 deep groove ball bearing is a single-row rolling bearing made from standard bearing steel (100Cr6) with a 160 mm bore, 290 mm outer diameter and 48 mm width. Designed as an open bearing, this SKF version allows for direct lubrication via the housing system. Owing to the raceway geometry, the component primarily accommodates radial loads as well as axial forces in both directions. Engineers and maintenance personnel use this size when robust components are required for mechanical engineering applications.

In which applications is the 6232 M/C3 deep groove ball bearing used?

The 6232 M/C3 deep groove ball bearing is suitable for bearing arrangements subject to continuous radial forces and axial loads in both directions. As it is an open design without a flange or groove on the outer ring, the bearing fits into cylindrical housing bores. The permissible temperature range extends from -20 to +150 degrees, enabling the rolling bearing components to withstand thermal stresses during continuous operation.

What are the advantages of the brass cage and C3 clearance in this bearing?

The built-in brass cage is characterised by high mechanical strength and resistance to dynamic loads. In combination with the slightly increased radial clearance (C3), the component compensates for operational thermal expansion between the shaft and the housing. In the case of tight fits or temperature differences, this increased operating clearance prevents the rolling elements from seizing up. Manufacture to tolerance class P0/PN or ABEC 1 ensures defined dimensional accuracy for industrial applications.