SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 10,95 € | 207,94 € |
| 5 | 21,88 € | 197,01 € |
The SKF 6222/C3 deep groove ball bearing, with dimensions of 110 × 200 × 38 mm and increased radial clearance, ensures reliable operation at high operating temperatures.
The 6222 /C3 deep groove ball bearing is a single-row radial ball bearing designed for heavy mechanical loads in mechanical engineering and plant construction. Manufactured from standard 100Cr6 rolling-element bearing steel, this open bearing primarily accommodates radial forces as well as axial guidance forces in both directions. The design is from SKF and features a dimensionally stable sheet steel cage. As it does not incorporate integrated seals, the design is suitable for environments with an external lubricant supply via oil or grease.
This radial ball bearing is typically used in industrial drives and shaft mountings subject to increased mechanical stress. Thanks to its open design, lubricant reaches the rolling elements and raceways unimpeded, enabling the component to dissipate thermal energy rapidly during operation. The permissible operating temperatures range from -20 to +150 degrees Celsius. Designers use this type in particular where shafts with a diameter of 110 mm are mounted and housing seals are handled separately.
The designation ‘C3’ indicates a slightly increased radial clearance compared with the standard version. This increased clearance between the balls and raceways counteracts any tightening of the bearing caused by heating or by tight fits on the shaft and housing. If the shaft expands thermally during continuous operation, the required mobility of the rolling elements is maintained. When selecting bearings, users should check whether significant temperature differences arise between the inner and outer rings during operation.
The bearing has an internal diameter of 110 mm, an external diameter of 200 mm and a width of 38 mm. The cylindrical outer ring has no groove or flange. These key dimensions enable the fit accuracy for bearing seats in machine components and housings to be clearly determined prior to assembly.
The designation C3 indicates a radial bearing clearance that exceeds the standard value for the standard version. This increased internal clearance serves to compensate for thermal expansion during operation or to accommodate any constrictions that may arise due to tight fits on the shaft. As a result, the component runs freely even when heated.
Both the inner and outer rings, as well as the rolling elements, are made from through-hardened standard roller bearing steel (100Cr6). The ball cage fitted is made from pressed sheet steel. This combination of materials has proven itself for decades in standard mechanical engineering applications and withstands the usual mechanical stresses encountered in continuous industrial operation.
The permissible temperature range for this bearing is from -20 to +150 degrees Celsius. As this is an open design without elastic plastic sealing lips, there are no sealing materials to limit the upper limit of the temperature range. To ensure reliable operation, it is crucial to select a heat-resistant lubricant for the system.
Open deep-groove ball bearings have neither cover plates nor sealing washers, meaning that lubricants such as oil mist or grease can reach the raceways directly. This design minimises friction, as there are no sealing lips to cause friction. To protect against dirt and moisture, an external seal is required within the surrounding housing structure.
Manufacturing is carried out to tolerance class P0/PN, which corresponds to the international standard ABEC 1. This standard tolerance is entirely sufficient for the vast majority of industrial applications in general mechanical engineering and gearbox construction. It defines the permissible dimensional and roundness deviations for correct fitting onto standardised shaft and housing seats.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership