Deep Groove Ball Bearings SKF 62207 -2RS1

The SKF 62207 -2RS1 deep groove ball bearing, measuring 35 x 72 x 23 mm, is protected against the ingress of dirt by seals on both sides.

The 62207 -2RS1 deep groove ball bearing is a single-row rolling bearing with a 35 mm bore, a 72 mm outer diameter and an extended width of 23 mm. Thanks to this wider design, the component offers an increased internal volume for lubricant. Manufactured from standard roller bearing steel 100Cr6 and fitted with a sheet steel cage, the bearing accommodates radial forces as well as axial loads in both directions. The design complies with the standard tolerance class P0/PN.

In which applications is the 62207-2RS1 deep groove ball bearing used?

This deep-groove ball bearing is suitable for applications where rotating shafts need to be protected against the ingress of dust, moisture or dirt particles. Typical applications can be found in general mechanical engineering as well as in bearing arrangements subject to combined radial and axial forces. With an operating temperature range of -20 to +120 degrees, the bearing is designed for thermally demanding environmental conditions, whilst the cylindrical outer ring without a groove allows for direct installation in smooth housing bores.

What is the function of the 2RS1 seal configuration?

The designation 2RS1 stands for abutment seals fitted on both sides. These sealing lips rest directly against the inner ring and retain lubricant inside the bearing whilst keeping out external particles. In combination with the standard radial bearing clearance (CN), this model is designed for standard operating conditions without excessive thermal expansion. The integrated sealing eliminates the need for additional sealing measures on the housing.