Deep Groove Ball Bearings SKF 6201 -2Z

The SKF 6201-2Z deep-groove ball bearing features compact dimensions of 12x32x10 mm, sheet metal shields on both sides and P6/P5 tolerances for demanding radial loads.

The single-row deep-groove ball bearing 6201 -2Z is a versatile rolling bearing designed primarily for radial loads. With a bore of 12 mm, an outside diameter of 32 mm and a width of 10 mm, it complies with common standard dimensions in mechanical engineering and equipment manufacturing. The bearing is manufactured by SKF in the Explorer series and is made from standard 100Cr6 rolling-element steel. A sheet steel cage guides the rolling elements evenly along the raceways. This design accommodates not only radial forces but also moderate axial forces in both directions.

What is the 6201-2Z deep groove ball bearing suitable for?

This deep groove ball bearing is typically used in compact shaft mountings as well as in general drive and conveyor technology. Thanks to the contactless cover plates on both sides, the design protects the interior of the bearing from coarse dirt particles without generating additional friction. This makes the design well-suited to high-speed applications. The permissible operating temperature range is from –20 to +120 degrees, meaning the component meets standard industrial requirements.

What are the key considerations regarding the cover plates and bearing clearance of the 6201-2Z?

Before installation, the environmental conditions at the respective bearing location must be checked. The suffix -2Z denotes gap seals made of sheet steel on both sides. These keep out solid particles but do not provide a seal against liquids or moisture. The bearing has standard radial clearance for typical fit conditions and moderate operating temperatures. A distinctive feature of this design is its enhanced precision: dimensional accuracy complies with tolerance class P6, whilst running accuracy is manufactured to class P5.