-
Bearings
Bearings
-
Housings/housing Units
Housings/housing Units
-
Linear Technology
Linear Technology
-
V-Belts
V-Belts
-
Seals
Seals
FAG
Deep Groove Ball Bearings FAG 607
- Technical data
- Inner diameter
- 7 mm
- Outer diameter
- 19 mm
- Width
- 6 mm
- Material
- Standard bearing steel
- Ball rows
- Single row bearing
- Seal
- None, open bearing
- Cage
- Sheet steel cage
- Clearance
- Normal radial clearance
- Running accuracy
- Tolerance class P0/PN2 / ABEC 1
- Current insulation
- No current insulation
- Bore
- Cylindrical bore
- Outer ring
- Without flange/groove
- Material of rolling elements
- Standard bearing steel
- Temperature range
- -30 to +120 °C
- Weight
- 0,008 kg
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 50 | 5% | 2,42 € |
| 100 | 10% | 2,29 € |
| 250 | 15% | 2,17 € |
| 500 | 20% | 2,04 € |
Deep Groove Ball Bearings FAG 607
The FAG 607 single-row deep-groove ball bearing, with its compact dimensions of 7 × 19 × 6 mm, offers an open design suitable for a wide range of industrial applications.
The 607 deep-groove ball bearing is a single-row radial ball bearing conforming to standard specifications. With a bore of 7 mm, an outside diameter of 19 mm and a width of 6 mm, this miniature bearing is suitable for compact designs with limited installation space. Manufactured from standard 100Cr6 rolling-element bearing steel, the component primarily withstands radial loads as well as moderate axial forces in both directions. The open design allows for direct integration into existing lubrication circuits using oil or grease.
In which applications does the 607 deep groove ball bearing prove its worth?
Design engineers use the 607 deep-groove ball bearing primarily in precision mechanical assemblies and compact equipment designs. This size is suitable wherever shaft diameters of 7 mm need to be guided in cylindrical seats. The version without a flange on the outer ring allows for flush mounting in cylindrical housing bores.
As the bearing is open at both ends, it is preferably used in the protected internal spaces of machinery units. There, the rolling bearing is protected from direct contamination or benefits directly from a circulating lubricating oil supply.
What are the key features of the open design with a sheet steel cage?
The open design of the 607 deep groove ball bearing does not feature integrated sealing washers. This means that no frictional resistance is generated by sealing lips during operation, which minimises friction losses and facilitates use at higher speeds. The sheet steel cage maintains the rolling elements at a uniform spacing and withstands mechanical stresses within a temperature range of -30 to +120 degrees.
Manufactured with standard radial clearance, the bearing is suitable for typical fit conditions and operating conditions without extreme temperature differences between the shaft and housing. To ensure proper operation, care must be taken to ensure a clean installation environment and appropriate lubrication.
What are the dimensions of the 607 deep-groove ball bearing?
The 607 deep-groove ball bearing has an inside diameter of 7 mm, an outside diameter of 19 mm and a width of 6 mm. These standardised dimensions allow it to be fitted into cylindrical bearing seats without the need for an additional flange or ring grooves on the outer ring.
What does the ‘open design’ mean in the case of this roller bearing?
An open roller bearing has neither cover plates nor contact seals. The raceways and balls are exposed, which keeps friction losses to a minimum. However, this design requires the housing to be sealed externally against dirt and lubricated with grease or oil.
What is the temperature range for which the 607 deep-groove ball bearing is designed?
The bearing can be used within an operating temperature range of -30 to +120 degrees. This temperature range is determined by the material properties of the 100Cr6 rolling bearing steel and the sheet steel cage. When selecting the bearing, the lubricant should be suitable for the same temperature range.
What is the typical radial clearance for this bearing?
The version with standard radial bearing clearance means that the bearing has the defined standard clearance between the outer ring, the balls and the inner ring. It is suitable for common fit combinations on shafts and housings where there are no extreme temperature differences between the bearing rings.
What is the bearing’s tolerance class?
The bearing complies with tolerance class P0 or PN (comparable to ABEC 1). This precision grade defines the permissible dimensional and runout tolerances of the rings for standard industrial use and meets the typical requirements in general mechanical engineering and fixture manufacturing.
What material are the rings and rolling elements made of?
Both the bearing rings and the rolling elements are made from hardened standard roller bearing steel 100Cr6. This material is characterised by high strength, dimensional stability and load-carrying capacity. A sheet steel cage is used to ensure the balls are guided in an orderly manner.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/
10014318