Deep Groove Ball Bearings FAG 6010 -2RSR-C3

The FAG 6010 -2RSR-C3 deep-groove ball bearing, measuring 50x80x16 mm, offers protection against dirt on both sides and increased bearing clearance.

This single-row deep groove ball bearing 6010 -2RSR-C3 from FAG accommodates radial loads as well as axial forces in both directions. The bearing is manufactured from standard rolling-element bearing steel 100Cr6 for the inner ring, outer ring and rolling elements, and features a dimensionally stable sheet steel cage. Two sliding seals fitted on both sides seal the interior against contaminants, whilst the increased C3 radial clearance compensates for thermal expansion of the shaft and rings during operation.

When is the FAG 6010-2RSR-C3 deep groove ball bearing the right choice?

This design is used in industrial shaft bearings where temperature differences between the rotating shaft and the housing may occur during operation. The slightly increased bearing clearance prevents premature straining of the rolling elements due to heating or tight fits. At the same time, the double-sided seal contact effectively protects the raceways from dust, dirt particles and moisture, provided the ambient temperature remains within the range of -20 to +100 degrees.

What are the key features of the seal and tolerance class for the 6010 model?

The combination of 2RSR grinding seals on both sides and factory-applied grease filling supports low-maintenance operation of compact machine components. Contacting sealing lips minimise lubricant leakage at the shaft and preserve the lubricating properties of the grease filling over long periods of use. Manufactured to tolerance class P0 or PN (corresponding to ABEC 1) and featuring a cylindrical outer contour without a flange or groove, the component can be fitted with a positive fit into standard cylindrical housing bores.