Deep Groove Ball Bearings SKF 16014

The SKF 16014 deep groove ball bearing, with dimensions of 70x110x13 mm and tolerance class P6, provides a narrow, precise bearing arrangement for radial loads.

The SKF 16014 single-row deep groove ball bearing accommodates radial forces and is suitable for transmitting moderate axial loads in both directions. Thanks to its narrow width of just 13 mm and an outside diameter of 110 mm, this rolling bearing saves axial installation space. Manufactured as an open version in the SKF Explorer performance class, the component is made from standard rolling-bearing steel (100Cr6) and guides the rolling elements in a sturdy sheet-steel cage. Designs benefit from this precise rolling-bearing component.

What are the industrial applications for the 16014 deep groove ball bearing?

This rolling bearing is primarily used where narrow axial dimensions are combined with shaft diameters of 70 mm. Typical applications are found in general mechanical engineering for shaft mountings with very limited installation space. As the bearing is open at both ends, it can be integrated directly into oil-lubricated systems or housings fitted with external seals provided by the customer. The permissible temperature range extends from –20 to +120 degrees Celsius and is suitable for corresponding thermal environmental conditions.

What role do tolerance class P6 and the open design play?

Manufacture to tolerance class P6 (corresponding to ABEC 3) offers tighter dimensional and running accuracies than standard tolerances. Together with the normal radial bearing clearance, this ensures smooth concentricity and low vibration levels when fitted correctly. When designing the system, take the open design into account: it requires external lubrication as well as protection against the ingress of dirt particles. For designers and maintenance engineers, the bearing provides a reliable foundation provided that shaft seats and housing bores are machined to the correct dimensions.