6320 -2Z Deep Groove Ball Bearings by FAG
6320 -2Z Deep Groove Ball Bearings by FAG

FAG

Deep Groove Ball Bearings FAG 6320 -2Z

Technical data
 
Inner diameter
100 mm
Outer diameter
215 mm
Width
47 mm
Ball rows
Single row bearing
Cage
Sheet steel cage
Clearance
Normal radial clearance
Running accuracy
Tolerance class P0/PN2 / ABEC 1
Current insulation
No current insulation
Bore
Cylindrical bore
Outer ring
Without flange/groove
Material of rolling elements
Standard bearing steel
Weight
7,51 kg
Scale quantity Your discount Unit price
2 14,72 € 279,65 €
5 29,44 € 264,93 €
294,37 €
inkl. MwSt, zzgl. Versandkosten

3 ready to ship

Deep Groove Ball Bearings FAG 6320 -2Z
In Stock

Deep Groove Ball Bearings FAG 6320 -2Z

The 6320-2Z deep-groove ball bearing from FAG Wälzlager measures 100 x 215 x 47 mm and is protected against coarse dirt particles by gap seals on both sides.

The 6320-2Z deep groove ball bearing from FAG Wälzlager is a single-row radial ball bearing for industrial applications. With a bore of 100 mm, an outer diameter of 215 mm and a width of 47 mm, this rolling bearing primarily accommodates radial and axial forces in both directions. Manufactured from 100Cr6 rolling-bearing steel, the design is characterised by dimensional accuracy to the standard tolerance P0/PN. A sheet steel cage guides the rolling elements at a uniform spacing during operation.

What loads and conditions can the 6320-2Z deep groove ball bearing handle?

The 6320-2Z deep groove ball bearing is designed to accommodate high radial loads as well as moderate axial forces in both directions on rotating shafts. With a permissible temperature range of –30 to +120 degrees, the component operates in environments with standard thermal conditions. The outer ring is designed without a flange or groove, allowing the bearing to be fitted with a positive fit into cylindrical housing bores.

What is the function of the cover plates on both sides of the 6320 -2Z model?

The suffix -2Z denotes cover plates mounted on both sides, made from profiled sheet steel. These non-contact gap seals shield the raceway area against the ingress of solid contaminants without causing additional frictional resistance. This model features standard radial bearing clearance. This variant is intended for designs featuring standard fits and balanced operating temperatures.

What are the dimensions of the 6320-2Z deep-groove ball bearing?

With an internal diameter of 100 mm, an external diameter of 215 mm and a total width of 47 mm, this single-row deep-groove ball bearing complies with standardised dimensions. This means the component fits into cylindrical housing bores and onto corresponding shaft seats in mechanical engineering applications.

What does the designation -2Z mean for this bearing?

The designation -2Z refers to cover plates made of profiled sheet steel fitted on both sides. These non-abrasive gap seals protect the interior from solid dirt particles. As there is no contact with the inner ring shoulder, no additional frictional heat is generated, which makes them suitable for use at higher speeds.

What is the clearance of the 6320 deep-groove ball bearing?

This bearing is manufactured with standard radial bearing clearance, which is designed for typical industrial operating conditions. This value describes the radial clearance between the outer ring, inner ring and rolling elements prior to installation. This design is suitable for standard fit selections on shafts and housings at normal operating temperatures.

Within what temperature range can the bearing be operated?

The operating range specified for the bearing is from -30 to +120 degrees. Within this temperature range, both the 100Cr6 rolling bearing steel and the sheet steel cage retain their dimensional stability. Separate thermal specifications are required for applications outside these limits.

Which cage is fitted in the 6320-2Z deep-groove ball bearing?

A sheet steel cage is used in the bearing to guide the balls at regular intervals. The construction, made from profiled sheet metal, is characterised by its low weight. It is designed for the entire temperature range up to +120 degrees.

What is the tolerance class of the FAG rolling bearing?

The ball bearing complies with the standard tolerance class P0 or PN, which is designated as ABEC 1 in the ABEC system. This precision class meets the requirements for dimensional and concentricity accuracy in mechanical engineering and allows for installation with standard housing and shaft tolerances.

Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/

10016847
Product added to compare.
Product added to wishlist

Reset Password

New Account Register