Deep Groove Ball Bearings SKF 4206 ATN9

The SKF 4206 ATN9 deep-groove ball bearing, a double-row rolling bearing with a 30 mm bore, offers high radial load-carrying capacity in a compact design.

Thanks to its two rows of balls, the SKF 4206 ATN9 double-row deep groove ball bearing can accommodate higher radial forces than single-row versions with the same bore diameter. With dimensions of 30 mm internal diameter, 62 mm external diameter and 20 mm width, this design is suitable for applications with limited radial installation space. The bearing is made from standard 100Cr6 rolling bearing steel and has a normal radial clearance in the standard tolerance class P0/PN or ABEC 1.

What is the 4206 ATN9 double-row deep groove ball bearing suitable for?

Design engineers primarily use this double-row bearing where combined radial and axial loads occur and the load-carrying capacity of single-row bearings is insufficient. Typical applications are found in bearings used in general mechanical engineering subject to high load levels. As the outer ring has no flange or groove, the component can be fitted flush into cylindrical housing bores.

What advantages does the polyamide cage offer in the 4206 ATN9 deep groove ball bearing?

The designator ATN9 indicates a polyamide cage. This material reduces the weight of the rolling element assembly and promotes quiet, vibration-damped operation. In combination with the open design without integrated sealing washers, the bearing is designed for a temperature range of –20 to +120 degrees. When designing the application, it should be noted that open roller bearings require an external housing seal as well as a suitable lubricant supply with oil or grease.