Deep Groove Ball Bearings FAG 6013 -2RSR

The FAG 6013-2RSR deep groove ball bearing, with dimensions of 65 x 100 x 18 mm and a ground seal on both sides, protects the interior of the bearing from contamination under radial loads.

The 6013-2RSR deep-groove ball bearing is a single-row radial ball bearing made from standard rolling-element bearing steel (100Cr6). With a bore of 65 mm, an outside diameter of 100 mm and a width of 18 mm, this design primarily absorbs radial forces. Thanks to the standard radial clearance, the shaft fits precisely at normal operating temperatures. Design engineers and maintenance technicians rely on this FAG rolling bearing when rotating shafts need to be supported.

What is the 6013-2RSR deep-groove ball bearing suitable for in industrial applications?

This single-row ball bearing is typically used in industrial drive systems and rotating machine shafts. As the outer ring has no flange or groove, the bearing can be fitted flush into cylindrical housing bores. The integrated sheet steel cage guides the rolling elements evenly at speeds with moderate noise levels. The design is suitable for stationary industrial plant as well as for machinery with a protected installation space.

What protection does the 2RSR seal offer in the 6013 deep groove ball bearing?

The 2RSR designation refers to abiding sealing lips fitted on both sides. These come into direct contact with the inner ring and help to keep dirt particles and splash water out of the bearing interior. At the same time, they help to retain lubricant within the rolling chamber. The seal design retains its function within a temperature range of -20 to +100 degrees. Compared with open bearings or cover plates, this design forms a barrier against abrasive particles.