Deep Groove Ball Bearings SKF 62307 -2RS1

The SKF 62307 -2RS1 deep groove ball bearing, with a 35 mm bore and a ground seal on both sides, offers effective protection against contamination under radial loads.

The 62307 -2RS1 deep groove ball bearing provides designers and maintenance engineers with a single-row radial ball bearing for demanding rotational movements. The design has an outer diameter of 80 mm and a width of 31 mm. The robust sheet steel cage guides the rolling elements evenly into the deep raceways of the inner and outer rings. Manufactured from standard 100Cr6 rolling-bearing steel, this design offers high dimensional stability under continuous load. The component is manufactured by SKF and complies with current industry standards.

What is the 62307-2RS1 deep groove ball bearing suitable for?

This rolling bearing primarily absorbs radial forces, but also guides shafts stably in both directions when subjected to axial forces. Typical applications include general mechanical engineering, as well as drive systems and industrial assemblies subject to combined loads. Thanks to its wide 31 mm design, the bearing provides reliable support on the shaft. At operating temperatures ranging from –20 to +120 degrees, the bearing operates reliably in standardised industrial environments without thermal overload.

What are the advantages of the double-sided 2RS1 seal?

The 2RS1 suffix denotes sealing discs that abut on both sides, featuring dimensionally stable sheet metal reinforcement. They protect the bearing interior from the ingress of moisture, dust or fine dirt particles. At the same time, the sealing lips reliably retain the factory-applied lubricant within the raceways. This sealed design eliminates the need for relubrication during operation, thereby reducing maintenance requirements for units that are difficult to access.