Cylindrical Roller Bearings FAG N312 -E-XL-TVP2

The FAG N312 -E-XL-TVP2 single-row cylindrical roller bearing, with a 60 mm bore and a flangeless outer ring, accommodates high radial loads when used as a non-locating bearing.

The FAG N312 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing designed for demanding industrial applications. With a bore of 60 mm, an outer diameter of 130 mm and a width of 31 mm, this design accommodates high radial forces via the line contact of the rollers. As this is an open bearing, the component can be flexibly integrated into existing lubrication systems. The integrated polyamide cage guides the rolling elements with minimal vibration and ensures even load distribution during operation.

What is the N312 -E-XL-TVP2 cylindrical roller bearing suitable for?

The N312 -E-XL-TVP2 cylindrical roller bearing is particularly suitable for bearing arrangements that must accommodate high radial forces at medium to high speeds. Typical applications include shaft mountings subject to purely radial loads and requiring axial compensation. Designed as a floating bearing, the N design allows for unrestricted compensation of thermally induced length changes in the shaft relative to the housing. The bearing covers an operating temperature range from –30 to +120 degrees and operates within a system with a separate lubricant supply.

What are the special features of the N design and the TVP2 cage?

In the N design, the inner ring features two fixed guide flanges, whilst the outer ring is flangeless and removable from both sides. This design facilitates assembly, as both bearing rings can be fitted separately. The TVP2 cage is made of polyamide and is characterised by its low weight and smooth running. In combination with the standard radial bearing clearance and tolerance class P0 (ABEC 1), the component is suitable for precisely guided shaft systems.