Cylindrical Roller Bearings FAG N215 -E-XL-TVP2

The FAG N215 -E-XL-TVP2 single-row cylindrical roller bearing, with dimensions of 75 × 130 × 25 mm, accommodates high radial loads as a separable idler bearing.

The FAG N215 -E-XL-TVP2 cylindrical roller bearing is an open, single-row radial roller bearing for industrial applications. Thanks to its cylindrical rollers, the bearing design provides line contact to accommodate high radial loads. With a bore of 75 mm, an outside diameter of 130 mm and a width of 25 mm, this design is suitable for rotating shafts in machine designs where it acts as a non-locating bearing.

What functions does the N215 -E-XL-TVP2 cylindrical roller bearing fulfil as a non-locating bearing?

In technical bearing arrangements, this design is primarily used to accommodate high radial forces at medium to high speeds. As a pure idler bearing, the N version compensates for axial changes in shaft length caused by heating with low friction directly within the bearing. Typical areas of application include mechanical engineering and industrial drive systems where a clear separation between fixed and floating bearings is required.

What are the distinctive features of the polyamide cage and the N design?

The N design is characterised by two fixed flanges on the inner ring, whilst the outer ring is flangeless and can be removed from both sides. This ability to be dismantled facilitates the assembly and disassembly of both rings. The integrated polyamide cage (TVP2) guides the rollers quietly, dampens vibrations and is characterised by its low weight. The open bearing is designed for operating temperatures ranging from -30 to +120 degrees.