Cylindrical Roller Bearings FAG NU2205 -E-XL-TVP2

FAG NU2205 -E-XL-TVP2 cylindrical roller bearing: Single-row non-locating bearing with a 25 mm bore, 52 mm outer diameter and a polyamide cage for radial loads.

The FAG NU2205 -E-XL-TVP2 cylindrical roller bearing is manufactured as a single-row roller bearing designed to accommodate high radial forces. Thanks to the line contact between the cylindrical rollers and the raceways, this design can accommodate high radial loads within the system. As an open rolling bearing without an integrated seal, the component can be integrated into lubricated housing designs and covers an operating temperature range from –30 to +120 degrees Celsius.

In which applications is the NU2205 -E-XL-TVP2 cylindrical roller bearing used?

This radial roller bearing is primarily used as a non-locating bearing in general mechanical engineering. As the inner ring is designed to be removable from both sides and has no fixed flanges, the shaft can be moved axially relative to the housing. This design compensates for temperature-induced length changes during operation without causing internal stresses. Typical applications include industrial shaft mountings where only radial forces are transmitted and axial longitudinal movements must be allowed to occur unhindered.

What properties does the TVP2 polyamide cage offer in cylindrical roller bearings?

The suffix TVP2 denotes a design with a polyamide cage. This material reduces the weight of the rolling element cage and guides the rollers with low friction within the bearing assembly. When selecting a lubricant, care must be taken to ensure compatibility with the polyamide material at the intended operating temperature. With tolerance class P0 (ABEC 1) and standard radial clearance, the bearing complies with the standard specifications for industrial fits in continuous operation.