Cylindrical Roller Bearings FAG NU220 -E-XL-TVP2

The FAG NU220 -E-XL-TVP2 cylindrical roller bearing, as an open idler bearing measuring 100 × 180 × 34 mm, reliably absorbs high radial forces.

The NU220 -E-XL-TVP2 cylindrical roller bearing is a single-row radial roller bearing from FAG designed for demanding industrial applications. With a bore of 100 mm, an outside diameter of 180 mm and a width of 34 mm, the bearing transmits high radial loads via the line contact of the cylindrical rollers. Thanks to its open design without an integrated seal, the lubrication supply can be flexibly adjusted via the housing.

What is the NU220 -E-XL-TVP2 cylindrical roller bearing suitable for?

Design engineers primarily use this cylindrical roller bearing in bearing arrangements where high radial forces occur under purely radial guidance. The NU design functions purely as a non-locating bearing. As the inner ring has no flanges, it can be removed from either side. This allows thermal-induced changes in shaft length to be compensated for without constraint directly within the bearing, thereby preventing axial stresses in the system.

What are the distinctive features of the TVP2 polyamide cage?

The designation TVP2 indicates a solid window cage made of polyamide. This cage is characterised by its low weight and elastic running characteristics, which reduce rolling element friction and promote smooth running. The bearing is designed for operating temperatures ranging from -30 to +120 degrees. In combination with the standard radial clearance and tolerance class P0 or ABEC 1, this design meets precise standard requirements in mechanical engineering.