SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 4,82 € | 91,56 € |
| 30 | 9,64 € | 86,74 € |
The SKF NU213 ECP cylindrical roller bearing, with a 65 mm bore, serves as a separable idler bearing for high radial loads in mechanical engineering.
The NU213 ECP cylindrical roller bearing combines an optimised internal design of the Explorer performance class with precise guidance of the cylindrical rollers. Thanks to the line contact between the roller bodies and raceways, this design can accommodate high radial forces. SKF manufactures this single-row bearing with separable rings. This facilitates precise installation on shafts with a 65 mm diameter and in housings with a 120 mm bore.
This design is primarily intended as a non-locating bearing in bearing arrangements subject to high radial forces. As the inner ring has no flanges, it can move axially relative to the outer ring when the shaft undergoes thermal linear expansion. This helps to prevent axial stresses in the bearing seat. The component withstands heavy radial loads, whilst the outer ring – which has no lubrication bore or ring groove – is fitted into cylindrical housing bores.
The polyamide cage reduces the component’s weight and facilitates low-friction guidance of the roller sets whilst ensuring even lubricant distribution. As the inner ring can be completely removed from both sides, the shaft and housing can be fitted separately. This simplifies inspection and maintenance procedures. As an open component without integrated seals, the bearing requires suitable lubrication as well as an external housing seal to prevent the ingress of contaminants.
With an internal diameter of 65 mm, an external diameter of 120 mm and a width of 23 mm, the bearing complies with standardised key dimensions. These dimensions enable it to be fitted as a direct replacement in existing bearing housings.
In the NU design, the outer ring has two fixed flanges, whilst the inner ring is flangeless. The inner ring can be pulled out axially in either direction, enabling the bearing to internally compensate for axial shaft displacement without absorbing axial forces.
The ECP version features an optimised internal design for favourable stress distribution, as well as a lightweight polyamide cage. This cage ensures low-friction roller movement and is suitable for standard operating requirements.
The permissible operating temperature range is from -30 to +120 degrees Celsius. The upper temperature limit is largely determined by the polyamide cage and the lubricant used; therefore, the operating temperature should be taken into account during operation.
Manufactured with standard radial bearing clearance (CN), the roller bearing offers dimensional accuracy to Class P0 or ABEC 1 and running accuracy to Class P6 or ABEC 3 for precise concentricity.
Designed without integrated sealing washers, the open design allows unobstructed access of lubricant via the housing. This permits flexible lubrication configuration, but requires effective external sealing to prevent contamination.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership