SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 97,41 € | 1.850,82 € |
| 3 | 194,83 € | 1.753,40 € |
The SKF NN3034 K/SPW33 double-row cylindrical roller bearing offers high radial rigidity and guidance accuracy with dimensions of 170 × 260 × 67 mm for demanding precision shafts.
The NN3034 K/SPW33 cylindrical roller bearing is an open, double-row precision non-locating bearing from SKF designed for shaft mountings subject to high radial loads. Thanks to its double row of rollers, the bearing can accommodate high radial forces whilst maintaining a compact design. The design without an integrated seal allows operation in oil- or grease-lubricated systems within a temperature range of -30 to +150 degrees. The brass cage reliably guides the rolling elements in the raceways, even under dynamic loads.
This double-row non-locating bearing is suitable for bearing arrangements with high requirements for concentricity and radial load-carrying capacity. As the outer ring is removable on both sides, the bearing compensates for axial length changes of the shaft relative to the housing with low friction. This design is intended for classic precision arrangements where precise guidance under high radial loads is required. Thanks to its open design, the component can be integrated directly into existing lubrication systems.
The tapered internal bore with a taper ratio of 1:12 allows the significantly reduced radial bearing clearance to be precisely adjusted when press-fitting onto a tapered shaft seat. Classification in tolerance class SP defines particularly tight running and dimensional tolerances, which minimises runout errors and increases guidance accuracy. In addition, the integrated lubrication groove and lubrication holes in the outer ring facilitate targeted relubrication of both rows of rollers directly at the contact zone.
The bearing combines two rows of cylindrical rollers with a significantly reduced radial clearance and the high-precision SP tolerance. The outer ring is designed to be removable from both sides, enabling the component to function purely as a non-locating bearing. A robust brass cage guides the sets of rollers with precision.
The double-row precision bearing has a bore of 170 mm, an outside diameter of 260 mm and a total width of 67 mm. These dimensions correspond to the standardised main dimensions of the NN30 design.
The tapered internal profile allows for controlled adjustment of the radial clearance during assembly. Axial movement of the inner ring along a suitable shaft taper causes the ring to expand, enabling the bearing clearance to be precisely adjusted to the operating conditions.
The designation W33 indicates a circumferential lubrication groove with radial lubrication holes in the outer ring. This ensures that, during relubrication, lubricant is delivered directly between the two rows of rollers, which helps to ensure an even supply to both raceways.
The bearing is designed for operating temperatures ranging from -30 to +150 degrees. As no elastic sealing elements are fitted, the actual operating limit depends primarily on the thermal stability of the selected grease or lubricating oil.
Brass cages offer high strength and good run-on properties under severe operating conditions. They can withstand high accelerations and vibrations and are suitable for demanding spindle bearings subject to high impact forces.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership