Cylindrical Roller Bearings SKF NJ2305 ECP

The SKF NJ2305 ECP cylindrical roller bearing is a single-row support bearing measuring 25 × 62 × 24 mm, designed for high radial loads in industrial machinery.

The NJ2305 ECP cylindrical roller bearing is a single-row roller bearing from the SKF Explorer series with an optimised internal design. Designed for a 25 mm shaft diameter, 62 mm outer diameter and 24 mm width, this bearing accommodates high radial forces. The open design allows the lubricant to be flexibly adapted to the operating environment. With its combination of dimensional accuracy to P0/ABEC 1 and increased running accuracy to P6/ABEC 3, the component meets precise guidance requirements in industrial bearing applications.

In which installation scenarios does the NJ2305 ECP cylindrical roller bearing absorb radial forces?

This cylindrical roller bearing is primarily used where high radial loads act on rotating shafts. As a support bearing, the NJ design guides the shaft in one axial direction whilst allowing axial displacement in the opposite direction. This enables the bearing arrangement to compensate effortlessly for thermally induced changes in length. The temperature range is from –30 to +120 degrees.

What functions do the NJ design and the polyamide cage fulfil?

The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This allows the inner ring to be removed from one side, which simplifies the assembly and disassembly of the bearing unit. At the same time, the component absorbs axial forces in one direction. The polyamide cage guides the cylindrical rollers quietly and reduces the moving mass within the bearing. When designing the bearing, please note that the standard radial clearance must be matched to the selected shaft and housing fits.