FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 10 | 8,83 € | 167,83 € |
| 20 | 17,66 € | 159,00 € |
The NJ218 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager, measuring 90x160x30 mm, provides a robust support bearing for radial forces and single-sided axial guidance.
The NJ218 -E-XL-TVP2 cylindrical roller bearing from FAG Wälzlager is a single-row roller bearing designed for demanding industrial applications. With a bore of 90 mm, an outer diameter of 160 mm and a width of 30 mm, the design is primarily intended to accommodate high radial loads. Thanks to the line contact between the rollers, this roller bearing exhibits exceptional rigidity. The open design operates with standard radial clearance within a temperature range of –30 to +120 degrees Celsius.
Design engineers and maintenance personnel primarily use this design in shaft mountings where high radial forces are present. As a support bearing, it also absorbs axial forces from one direction whilst allowing axial displacement in the opposite direction. This enables thermal length changes in the shaft to be compensated for during operation. The design facilitates assembly, as the inner ring can be removed from one side and fitted onto the shaft separately.
The integrated polyamide cage guides the cylindrical rolling elements between the raceways with low vibration and low noise. The low inherent weight of the material reduces the dynamic mass forces during operation. As this is an open bearing without an integrated seal and without a lubrication bore in the outer ring, the lubricant is supplied via the housing. When designing the bearing, the standard tolerance class P0/PN and the operating temperature of up to +120 degrees Celsius must be taken into account.
With an internal diameter of 90 mm, an external diameter of 160 mm and a width of 30 mm, the bearing complies with standardised dimensions. Before installation, the shaft and housing should be precisely adjusted to these nominal dimensions to ensure that the rings fit perfectly.
The NJ design is characterised by two fixed flanges on the outer ring and one fixed flange on the inner ring. This arrangement enables the bearing to be used as a support bearing: the bearing withstands high radial loads and unilateral axial forces, whilst the shaft remains free to move axially in the opposite direction.
The permissible operating temperature range is from -30 to +120 degrees Celsius. This range is largely determined by the material of the polyamide cage. For operating conditions outside these limits, special designs or alternative cage materials are required to ensure that the bearing assembly continues to function correctly.
The polyamide cage guides the cylindrical rollers, which are lightweight and have damping properties. This reduces the dynamic mass forces during changes in rotational speed during operation. Furthermore, the material promotes quiet running of the rolling elements, which has a positive effect on the vibration behaviour of the bearing assembly.
As an open type without integrated seals and without a lubrication bore in the outer ring, the bearing requires a lubricant supply via the housing. Grease or lubricating oil is supplied via the housing design. At the same time, an external housing seal is required to prevent the ingress of dirt and moisture.
P0 or PN stands for standard tolerances in accordance with standard specifications and corresponds to the ABEC 1 classification. This specification defines the permissible dimensional, geometric and running accuracies for the inner ring, outer ring and bearing width. The standard accuracy adequately meets the requirements of common industrial applications in practice.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/