FAG
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 15 | 5,21 € | 98,93 € |
| 30 | 10,41 € | 93,73 € |
The FAG NJ214 -E-XL-TVP2 cylindrical roller bearing, measuring 70x125x24 mm, offers high radial load-carrying capacity and axial guidance in one direction.
The FAG NJ214 -E-XL-TVP2 cylindrical roller bearing is a single-row rolling bearing designed for demanding industrial applications. With a bore of 70 mm, an outside diameter of 125 mm and a width of 24 mm, this bearing can withstand high radial loads. Thanks to its manufacture to standard tolerances (P0/PN or ABEC 1), this component is suitable for machine builders and maintenance engineers seeking ready-to-fit standard bearings. For maintenance organisations and purchasers, the standardised dimensions facilitate the procurement of precisely matching spare parts.
This single-row cylindrical roller bearing is primarily used where high radial loads are present and shafts need to be guided. Typical applications include industrial drives and single-sided guided bearings. As the outer ring has two solid flanges and the inner ring is flangeless on one side, the unit functions as a support bearing. It absorbs radial forces and supports the shaft axially in one direction, whilst compensating for changes in length in the opposite direction.
The NJ design allows for the compensation of axial displacement of the shaft in one direction, whilst the inner ring, which can be removed from one side, simplifies installation. When designing the system, it should be noted that this is an open bearing without an integrated seal, which is integrated into the machine’s lubrication system. The polyamide cage (TVP2) guides the rollers quietly. The bearing is designed for a temperature range of -30 to +120 degrees.
The dimensions are 70 mm bore diameter, 125 mm outer diameter and 24 mm width. These standardised key dimensions enable a precise fit when installed in housings and on shafts in accordance with standard mechanical engineering specifications.
In the NJ design, the bearing has two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the bearing to accommodate not only radial forces but also axial forces in one direction. In the opposite direction, the bearing arrangement allows for axial displacement of the shaft.
Made from polyamide, the cage, designated TVP2, ensures smooth running of the cylindrical rollers whilst being lightweight. The material is characterised by good damping properties and is designed for an operating temperature range of -30 to +120 degrees.
This model is manufactured with standard radial bearing clearance. The bearing clearance refers to the radial play between the rollers and the raceways in the initial state, when no load is applied. The standard version is suitable for typical fit conditions and standard operating conditions in industrial applications.
Open roller bearings do not have integrated seals, so that lubricating oil or grease can circulate freely within the assembly. Sealing against environmental influences is provided externally by the housing design. Furthermore, the open design allows the bearing to be relubricated via the housing system.
This classification denotes the standard tolerance class for industrial roller bearings. It specifies the permissible dimensional and concentricity tolerances for the inner and outer rings. Components in this precision class meet standard requirements in mechanical engineering and facilitate dimensionally accurate replacement.
Schaeffler Technologies AG & Co. KG
Industriestraße 1-3, 91074 Herzogenaurach, Germany
info.de@schaeffler.com, https://www.schaeffler.de/de/meta/impressum/