SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,30 € | 43,53 € |
| 35 | 4,59 € | 41,24 € |
The SKF NJ206 ECP/C3 cylindrical roller bearing is a single-row support bearing with a 30 mm bore, a 62 mm outer diameter and a polyamide cage designed for high radial loads.
The SKF NJ206 ECP/C3 cylindrical roller bearing, as a single-row radial roller bearing, accommodates high radial forces. Due to its NJ design, the bearing has two fixed flanges on the outer ring and one fixed flange on the inner ring. This allows it to provide additional support to shafts in the axial direction. The design features an optimised internal geometry, a lightweight polyamide cage and no integrated seal. This open bearing is primarily used in designs with an external lubrication supply.
This cylindrical roller bearing is suitable for bearing arrangements subject to predominantly radial loads and axial forces acting on one side only. Typical applications include machine components where shafts must be axially fixed whilst simultaneously accommodating high transverse loads. The inner ring, which can be removed from one side, allows the component to be fitted separately. It compensates for axial length changes of the shaft in one direction, whilst the fixed end provides axial guidance in the opposite direction.
The suffix ECP denotes an optimised internal design in combination with a polyamide cage. This material reduces the weight of the rolling element guide and promotes quiet running. The designation C3 indicates a slightly increased radial clearance. It compensates for operational temperature differences between the inner and outer rings and counteracts any straining of the bearing when it heats up within the permissible range of -30 to +120 degrees.
The bearing has an inner diameter of 30 mm, an outer diameter of 62 mm and a width of 16 mm. With these dimensions, it complies with the standardised NJ206 series and fits into housing bores and shaft seats designed for this size.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. This enables the component to function as a support bearing. In addition to high radial forces, it also accommodates axial guidance forces from one direction, whilst the inner ring remains removable from one side for installation.
The C3 bearing clearance has a greater radial clearance than standard bearing clearance. This design is recommended for tight fits or where there are temperature differences between the rotating shaft and the housing. The additional clearance prevents the rolling elements from becoming jammed due to thermal expansion.
The polyamide cage is characterised by its low weight and elastic damping properties. It guides the rolling elements with low friction and contributes to low-vibration operation. The material reduces inertial forces during rapid speed changes within the permissible temperature range of -30 to +120 degrees.
As the bearing is designed as an open type without its own sealing rings, lubricant reaches the rollers and raceways directly. The outer ring has no lubrication groove. Lubrication is therefore provided by the surrounding machine housing, for example via an existing oil bath or an external grease fill.
The bearing combines two levels of precision: dimensional accuracy complies with the standard tolerance P0 or ABEC 1 for standard mounting dimensions. Running accuracy is specified to the finer tolerance class P6 or ABEC 3, which improves the concentricity of the rotating shaft during operation.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership