SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,42 € | 45,87 € |
| 35 | 4,82 € | 43,47 € |
The SKF NJ206 ECP cylindrical roller bearing (30x62x16 mm) withstands high radial loads and supports shafts axially in one direction.
The NJ206 ECP cylindrical roller bearing is a single-row radial roller bearing from SKF in the Explorer series, featuring an optimised internal design. Designed with a bore of 30 mm, an outer diameter of 62 mm and a width of 16 mm, the design accommodates high radial forces. The open bearing features a lightweight polyamide cage and standard radial clearance. Thanks to dimensional accuracy to P0/ABEC 1 and increased running accuracy to P6/ABEC 3, the shaft runs smoothly and with high positioning accuracy.
This cylindrical roller bearing is suitable for shaft mountings where high radial loads are the primary concern. As a support bearing, the NJ design accommodates not only the dominant radial forces but also axial forces in one direction. In conjunction with a suitable mating bearing, the axial guidance of the shaft can be precisely defined. With a permissible temperature range of -30 to +120 degrees, the component is suitable for a wide range of industrial operating conditions, provided there is a continuous supply of lubricant.
In the NJ design, the outer ring has two fixed flanges, whilst the inner ring has a single flange and is removable from one side. This split design simplifies the separate installation of the inner and outer rings onto the shaft and housing. The polyamide cage guides the cylindrical rollers quietly and, thanks to its low weight, reduces friction within the rolling element set. As the bearing is of an open design and the outer ring has no lubrication groove, you can flexibly adapt the lubricant supply and external sealing elements to suit the surrounding housing.
With a bore of 30 mm, an external diameter of 62 mm and a width of 16 mm, the component complies with the standardised dimensions for this size. These dimensions allow for a precise fit when installed in housing bores and on corresponding shaft seats with standardised fit specifications.
The NJ design functions as a support bearing with two fixed guide flanges on the outer ring and one fixed flange on the inner ring. As a result, the bearing absorbs axial forces in one direction, whilst allowing axial displacement of the shaft relative to the housing in the opposite direction.
The polyamide cage keeps the rollers at a uniform distance apart and ensures smooth running. Compared with metal versions, polyamide offers a lower weight and favourable damping properties. With this cage material, the permissible operating range of the bearing is from -30 to +120 degrees.
Classification to P6 or ABEC 3 defines a tighter running tolerance than the P0/PN standard. Whilst the dimensional accuracy for the bore and outside diameter corresponds to the standard P0 class, the finer concentricity precision to P6 ensures reduced operating clearance in concentricity and facilitates precise centring of rotating shafts.
As an open design, the bearing has neither integrated sealing washers nor a lubrication groove on the outer ring. Grease or lubricating oil is supplied directly via the surrounding machine housing, which is protected against the ingress of dirt and loss of lubricant by external sealing elements such as radial shaft seals.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership