SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 25 | 2,01 € | 38,19 € |
| 35 | 4,02 € | 36,18 € |
The SKF NJ204 ECP cylindrical roller bearing (20x47x14 mm) is designed as a single-row support bearing for high radial loads with single-sided axial guidance.
The SKF NJ204 ECP cylindrical roller bearing, as a single-row roller bearing, primarily accommodates high radial forces. Thanks to the line contact of the cylindrical rollers, the design can handle high radial loads compared to point-contact bearings. This bearing type is characterised by two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the component locks the shaft in one axial direction whilst simultaneously allowing for compensation of length changes in the opposite direction.
This support bearing is used in shaft mountings where, in addition to high transverse forces, unilateral guiding forces in the longitudinal direction also occur. As a support bearing, it absorbs axial guiding forces in one direction whilst allowing thermal length changes of the shaft in the opposite direction. As the inner ring can be removed from one side, the inner and outer rings can be fitted separately onto the shaft and housing. This simplifies installation and the replacement of components during maintenance work.
The ECP suffix denotes an optimised internal design in combination with a polyamide cage. This material keeps the weight of the rolling element assembly low and dampens running noise during operation. The permissible temperature range is from –30 to +120 degrees Celsius. As this is an open bearing without integrated seals and without a lubrication groove in the outer ring, the supply of lubricant and sealing are provided by the surrounding housing structure.
The dimensions are 20 mm bore diameter, 47 mm outer diameter and 14 mm width. Before installation, the shaft seat and the housing bore should be adjusted to these dimensions to ensure that the rings fit precisely.
With two fixed flanges on the outer ring and one fixed flange on the inner ring, the NJ design guides the shaft axially in one direction. In the opposite direction, it allows for axial displacement, enabling the component to serve as a support bearing for guidance applications.
The bearing is designed for a temperature range of -30 to +120 degrees Celsius. The primary limiting factor here is the polyamide cage. When selecting a lubricant, care must be taken to ensure that the oil or grease is approved for this temperature range.
The bearing is manufactured with standard radial clearance. This standard clearance is designed for typical operating conditions with moderate fits on the shaft and housing, as well as balanced temperature differences between the inner and outer rings.
In terms of dimensional accuracy, the product complies with Class P0/PN (ABEC 1), whilst its running accuracy is to Class P6 (ABEC 3) standards. This ensures smooth, low-vibration operation during normal use.
As it has no integrated seals, the open design allows oil or grease to enter freely from the surrounding environment. This is suitable for lubricated housing assemblies, but requires an effective external housing seal to protect against dirt and moisture.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership