SKF
| Scale quantity | Your discount | Unit price |
|---|---|---|
| 2 | 20,13 € | 382,46 € |
| 5 | 40,27 € | 362,32 € |
The SKF NJ2315 ECP/C3 cylindrical roller bearing offers high radial load-carrying capacity with dimensions of 75x160x55 mm and single-direction axial guidance.
This single-row cylindrical roller bearing, the NJ2315 ECP/C3, primarily accommodates high radial loads and, thanks to the NJ design, also provides axial guidance to the shaft in one direction. The optimised internal design improves contact between the rollers and the raceway, thereby reducing harmful stress peaks. With a bore of 75 mm, an outside diameter of 160 mm and a width of 55 mm, this roller bearing is suitable for demanding industrial applications. SKF manufactures this open bearing with a flexible polyamide cage.
Design engineers primarily use this design where high radial loads occur and the shaft requires axial support on one side. As a support bearing, the NJ design allows axial displacement in one direction, whilst the inner ring maintains firm contact with the shaft on the other side. Typical applications include bearing arrangements where shafts are guided under high radial loads and thermal expansion is compensated for on one side. As the inner ring can be removed from one side, the open bearing can also be pressed into place separately from the other components.
The combination of a polyamide cage and a slightly increased radial clearance (C3) is specifically suited to bearing arrangements subject to thermal stress. The polyamide cage is characterised by its low weight and good free-running properties, which reduce friction and noise. The increased C3 bearing clearance compensates for thermal expansion between the shaft and the housing, ensuring that the bearing does not become stressed even at higher operating temperatures. The permissible temperature range here is from –30 to +120 degrees Celsius.
The NJ design features two fixed flanges on the outer ring and one fixed flange on the inner ring. As a result, the component acts as a thrust bearing, which absorbs high radial forces and locks the shaft axially in one direction. In the opposite direction, the shaft remains free to move in order to compensate for thermal expansion during operation.
The bearing has an inner diameter of 75 mm, an outer diameter of 160 mm and a width of 55 mm. The outer ring has neither a groove nor a lubrication bore. This design is intended to accommodate high radial loads whilst maintaining a compact design.
The suffix ECP indicates an optimised internal design and a polyamide cage. This type of cage reduces the weight of the rotating masses, operates quietly and withstands dynamic loads. The design is suitable for operating temperatures ranging from -30 to +120 degrees Celsius.
The designation C3 indicates a slightly increased radial bearing clearance compared with the standard version. This additional clearance prevents the cylindrical rollers from seizing up if temperature differences occur between the inner and outer rings during operation, or if tight fits reduce the bearing clearance after press-fitting.
In terms of dimensional accuracy, the bearing complies with classes P0 and PN, or ABEC 1. In terms of running accuracy, this version meets the tighter tolerance class P6, or ABEC 3. This classification ensures precise concentricity for traditional industrial applications with high concentricity requirements.
As this is an open bearing without integrated seals, lubrication is provided by the surrounding structure. You can operate the cylindrical roller bearing using either lubricating oil or grease. The open design requires suitable external seals on the housing to retain the lubricant and prevent the ingress of dirt.
SKF Group
Sven Wingquists Gata 2, 415 50 Gothenburg, Sweden
info@skf.com, https://www.skf.com/uk/footer/site-ownership